Printable View
Hey guys,
Bought an on/off/on rocker switch for my rear work light at the 4wd show. Was super stoked to get it and i thought it would be a breeze to wire it... little did i know it had 7 pins on the back.
Anyone have any idea how to wire to reverse/off/on with this switch. also has an led if that helps
Cheers
Rear looks like this:
_ _ _ _
_ _ _
if you have a multimeter you can easily find out by switching it to test for continuity and place it on two pins at a time and you will soon see what pin will do what, I’ve attached a pic so you can see what to switch it to if your not sure
thanks mate! ill try that out!
shouldnt take you long mate depending on your multi you can set them to beep so you dont have to keep looking at it.
Not all switches are alike......It is going to be something like
N/O COM N/C 0Volt
N/O COM N/C
Whose switch is it? Is it a Custom Rockers Switch?
Mic
it was from prestige off road
i think i traced the diagram to this site.
http://www.4x4offroadclinic.com.au/d...ightrevers.pdf
This looks right....ooh I was so close...
Mic
nice one, but also have a play with the multi's continuity function can be a handy tool.
Yea exactly. Gonna do that when I have some more time ad wrote up the wiring with the relay if needed?
Thanks for the help guys!