Wheel Alignment question for smart people
Ok, trying to do a Cowboy front wheel alignment. Yes yes, I could go somewhere but close enough will do gents.
Ok, on the hoist and measuring tread block to tread block. Front and back of a 37 Trep.
Measurements are
Front 1406mm
Rear is 1409mm
Diameter at tread block is 818mm
Now I think standard Front end alignment is like 2 degrees Toe In.
The above are a very slight Toe In. I don't want to scrubb out the tyres but keen to get somewhere near factory if i can.
Any Mathematicians out the can tell me what the measurements should be to be close to 2degrees Toe In.
Can someone also confirm I'm chasing 2 Degrees Toe In
Thanks Gents.
Anyone with Kids doing Year 12 Maths this will be a cake walk for them. Lol