What has made you Angry Today???????

Quote:

---

Originally Posted by Clunk

Probanly only one considering ots the insurers approved repairer

---

what the blue book value of your Patrol,
or is it based on what you have it insured for.
I realize blue book doesnt represent true value

Looking at the damage done I think the bull bar
was too well made, just a thought

A lot of it will be labour in that but that's also an insurance claim price does seem ridiculous based on the panel damage to the patrol.

Quote:

---

Originally Posted by threedogs

what the blue book value of your Patrol,
or is it based on what you have it insured for.
I realize blue book doesnt represent true value

Looking at the damage done I think the bull bar
was too well made, just a thought

---

obviously it's insured for more than the book price, and yes the bar was very well made, built for off road and wouldn't expect anything less from Mike at Xlr8 Fabrications

Not angry, just knowing that is going to be full on again.

Soccer training has started earlier this week and with a practice match in 8 hours.
Training Tuesday/Thursady.

After a year off due to an ankle injury my eldest is back at preseason training at a different club, 20 minutes away. Monday/Wednesday.

So that's training 4 nights a week with 2 games on Sundays.

my whipper snipper is on its last chance if it breaks once more its going under the mav.

I woke up and realised that I have had the sink drain holes cut in the wrong spot on a granite bathroom vanity top I just had made! The top is 1500mm long and I've had the holes drilled in 400mm from each end, I forgot about the drawers underneath, so the holes should have been 375mm in from the end due to the pipework cutouts in the drawers.

Hmmm? should be able to get the top drawer cutouts offset, to work around the fark up hopefully! Otherwise it looks like we will have a cupboard underneath instead of drawers. Bang Head

Quote:

---

Originally Posted by stevemc181

I woke up and realised that I have had the sink drain holes cut in the wrong spot on a granite bathroom vanity top I just had made! The top is 1500mm long and I've had the holes drilled in 400mm from each end, I forgot about the drawers underneath, so the holes should have been 375mm in from the end due to the pipework cutouts in the drawers.

Hmmm? should be able to get the top drawer cutouts offset, to work around the fark up hopefully! Otherwise it looks like we will have a cupboard underneath instead of drawers. Bang Head

---

Whats the golden rule "measure twice ,,,cut once"

Quote:

---

Originally Posted by threedogs

Whats the golden rule "measure twice ,,,cut once"

---

Unless you mistakenly follow my rule. Measure once, cut twice. Done that a few times in my life and i still dont learn.

Sent from my GT-N7105T using Tapatalk

Yep one of important rules in my field of work when we run long cables. You can always cut off, but you can never cut on.

I just cut, saves the time I would have wasted measuring. And why if you have to cut 4 things the same length, you get the same length and 2 a different length.

It has to be same bast@rd that hangs around my drier and knicks odd socks. Same with curtains on cords. I never pick the correct cord, I open them when I want to close them. Why?