OK!! I have to share this with you mate.......
Dont Hate me.....
Attachment 75839
Printable View
OK!! I have to share this with you mate.......
Dont Hate me.....
Attachment 75839
Hey @mudski you should be doing all this in your Build thread mate. it took some finding here and will be lost forever. Even a special thread for the heater core. I reckon your build thread though mate.
Mark, guess there is always another way. Lot of aftermarket ones out there have the flow and return pipes welded into core/no flange and that what makes it harder.
Got the sound deadening in. Well most of it. Stupid me bought not enough lol.http://www.nissanpatrol.com.au/forum...018/07/128.jpg
The passenger side foot well I fell short.
Sent from my crapPhone using Tapatalk
Yeah my build thread is buggered. A while back I had issues with imageshack or photobucket, cant remember, not bringing up photos. So in my wisdom I decided to delete all the pic and start uploading again. But I just made it worse, lol. Then I gave up. So, its gone. Maybe I should just start a new one.
2 new 33 in maxxis MT tyres , probably a lot dearer here but no choice they were $380 each fitted and balanced
I forgot I had these. A GUIV clock spring and steering wheel radio switch for the GUIV leather wheel I retro fitted. Contemplating grafting this into the already modified clock spring I have.
Attachment 75842
Also more goodies today. Hi flow stat and New hoses, new spring load T bolt clamps and decent full stainless hose clamps that won’t destroy the rubber hoses.
Attachment 75843
Sent from my crapPhone using Tapatalk
New set of wheel nuts all round, pulled the dash apart to get to the back of the radio. reception is fine in the metro area, then absolutely crap by the time I get 25k down the road. Found the antenna cable pulled out of the rear - no doubt I have managed to do that at some point when pushing cables around, so in it went. Still crackly on AM and does not pick up many channels, unsure what the problem is now. Also found the recently installed clock plug could be seated further in, so keen to see if that fixes the intermittent glow or not.