Printable View
Quote:
Originally Posted by PeeBee
To my frustration I am in the middle of a full front end strip down too damn it. I was going to grab a set of pics using a couple of options for king Pin bearing removal and post up too. Add yours mate. I will edit my post too and add mine at the start in the right spot.
I have a Ctek mxs5 Mark and it’s an awesome charger. Worth looking at...Quote:
Originally Posted by MB
https://www.ctek.com/products/vehicle/mxs-5-0
Sent from my crapPhone using Tapatalk
@MBQuote:
Originally Posted by mudski
I second this. I have the 4 Amp version and it charges batteries like a champ. Coupled with my in-car CTEK setup, it charges both Aux & starter.
http://www.nissanpatrol.com.au/forum...id=75761&stc=1
I've got the smaller 3.8A version and I use it as a maintenance charger only. Because my car can sit for a month without being driven I keep this charger on it all the time, hopefully it will make the batteries last longer.
Sent from my SM-G960F using Tapatalk
Bled brakes for 4 hrs, could not get the pedal to stop hitting the firewall. made a few calls to gents on the Forum for advice, nope didn't change. Ended up putting 2L of fluid thru the system, completely flushed it out, no leaks visible anywhere. Came to the conclusion perhaps the brake master cylinder was passing fluid, so pulled it out, looks fine but not wanting to root around any further, purchase a new Nissan brake master cylinder on the basis this one had done its job since 1997, and its a process of elimination. Bled brakes PR, DR, PF then DF and also the brake proportining valve. PedAL would pump up with engine off then fall to the firewall as soon as the engine was turned on and wouldnot return.
Whilst putting the LR wheel back on noticed the stone shield on the Koni shocker has been torn away - trying to find a card reader for my camera - study has eaten it - so will post up shots later - pretty violent damage, and the shocker will be rooted for sure - lucky I have a couple of spares.
Stripped down the feont diff and removed the centre to swap out for a 4.1 with airlockee. Swivel hubs where os very poor shape so turned into a full rebuild. Finished at 7:30 tonight. Needless ro say im cooked
Hey mark. I bit the bullet 2 years ago and spent $$$ on a decent charger. 15amp smart charger. 12v/24v. Beast Charger.Quote:
Originally Posted by MB
Noco Genius 15000
http://www.nissanpatrol.com.au/forum...2018/07/11.jpg
Sent from my SM-G955F using Tapatalk
Cheers ‘daz’, appreciated! Too many choices now, looks The Tops :-)
Sent from my iPhone using Tapatalk
@MB I will add with the Ctek, if the battery is fubar, the charger will let you know. Plus the recond mode is awesome. Did the battery in the wifes car which was dead flat, brought it back to life...
SOLD!
Sent from my iPhone using Tapatalk