LED Light Co

Printable View

Show 40 post(s) from this thread on one page

10th July 2016, 08:44 PM
Lights

Hi Kallen.

We have stripped Aurora's down before and re sealed them successfully and I would suggest doing so before the moisture affects the PCB. It's a time consuming job to get right but certainly doable.

Hope all is well.

Paul
10th July 2016, 08:47 PM
Lights

Hi NissanGQ4.2.
Nothing specific for aquariums however take a look at these.. http://www.ledlightco.com.au/led-rigid-strip-lights/
They are not designed to be submersed but are waterproof and may suit our application.

Paul
10th July 2016, 08:51 PM
Lights

Thanks for the interest guys.
I am doing my best to get these up on our website but work has been busy and I don't have enough hours in the day to get it all done. It will happen, hopefully within the next week and I can post some pictures up for all to see. In the meantime I guess you'll have to take Darren's word as to how impressive they are!

Cheers,
Paul
10th July 2016, 08:51 PM
BigRAWesty

Quote:

Originally Posted by Lights

Hi Kallen.

We have stripped Aurora's down before and re sealed them successfully and I would suggest doing so before the moisture affects the PCB. It's a time consuming job to get right but certainly doable.

Hope all is well.

Paul

Thanks mate..
Yea thought they would be..
Cheers
11th July 2016, 10:15 AM
Hodge

Quote:

Originally Posted by MudRunnerTD

I went and saw Paul today and spent some money but have purchased a Hot off the Boat LED Light Bar that outshines his premier range of Aurora bars about 500%! wow! I can't wait to mount it up and get in the bush.. I will see if it fits in the space on the GUIV and might invest in one for the GUIV too.

Paul has some great lights guys and for those ordering online he has a section of his shop setup especially for packing his mail order stuff and his shipping is often same day. Get on it guys.

Thanks Paul for some great deals bud. We need to go driving mate

Hi Darren, I'm really interested in a light bar and your post caught my attention.
I saw you also mentioned there is no link on their website yet, but could this be the bars? 10W Cree's ? Maybe Paul added them after you looked ?

http://www.ledlightco.com.au/10-watt/
11th July 2016, 04:02 PM
Lights

1 Attachment(s)

Quote:

Originally Posted by Hodge

Hi Darren, I'm really interested in a light bar and your post caught my attention.
I saw you also mentioned there is no link on their website yet, but could this be the bars? 10W Cree's ? Maybe Paul added them after you looked ?

http://www.ledlightco.com.au/10-watt/

Hi Hodge.
Thanks for taking a look at our website however they are not the lights. I still haven't had a chance to get them up but here is a teaser..
Attachment 68081
11th July 2016, 04:54 PM
mudski

Quote:

Originally Posted by Lights

Hi Hodge.
Thanks for taking a look at our website however they are not the lights. I still haven't had a chance to get them up but here is a teaser..
Attachment 68081

Hurry up!!!!!!! Lol
I need one too. Well want one. My current light bar is a mobile fish tank at the moment. Still works though...
11th July 2016, 07:19 PM
michaelgreeny

Quote:

Originally Posted by mudski

Hurry up!!!!!!! Lol
I need one too. Well want one. My current light bar is a mobile fish tank at the moment. Still works though...

Second that! This is a definite need. Taking pre-orders?
11th July 2016, 07:38 PM
Lights

Quote:

Originally Posted by michaelgreeny

Second that! This is a definite need. Taking pre-orders?

I am happy to put peoples names against a bar. Sizes available are 12" (100w), 23" (200w), 27" (240w) & 37" (340w).
They are due to arrive in approximately 3 weeks.
11th July 2016, 07:47 PM
michaelgreeny

Cheers Paul,

Feel free to put my name down for a 37'.

Looking forward to it!
11th July 2016, 09:59 PM
mudski

Yeah I'll take a 37incher. Can you advertise the price here? Or pm me?
12th July 2016, 09:09 AM
Lights

Price on the 37" bar is $436 including forum discount.
12th July 2016, 09:36 AM
mudski

Yeah put my name on one please....
14th July 2016, 03:07 PM
Lights

Finally had a chance to get these up on our site..

http://www.ledlightco.com.au/10w-extreme-series/
14th July 2016, 10:45 PM
mudski

Quote:

Originally Posted by Lights

Finally had a chance to get these up on our site..

http://www.ledlightco.com.au/10w-extreme-series/

So how do we go about ordering for the discount Paul? @Lights
15th July 2016, 11:02 AM
Lights

Give me a call 0352481621 or alternatively PM me your number and best time to contact you.
15th July 2016, 11:09 AM
mudski

Thanks I'll get onto it.
15th July 2016, 11:06 PM
Sprock

Just had a look at your website - you've got some good stuff there , I'll be in touch about some work lights soon .
20th July 2016, 08:28 AM
AB

Hi folks,

Just letting you know that Paul is continuing on our forum sponsor for another 12 months.

Cheers Paul and thank you for your ongoing support!
20th July 2016, 09:27 AM
MudRunnerTD

Good on you Paul.

I had a chance to unpack my new light on the weekend and took a couple of pics.

This is the new "Extreme" light. 1 of the Race Cars in the Winch Truck racing on the weekend had this on his roof, he has ran an Aurora bar for years. The Feedback from him was "OMFG Paul!! That Light Bar is Nuts mate"

I can't wait!!!

http://www.nissanpatrol.com.au/forum...016/07/215.jpg

Note the 10W Cree LEDs are set facing Up into a Huge reflector.

http://www.nissanpatrol.com.au/forum...016/07/216.jpg

Spot and Flood Combo

http://www.nissanpatrol.com.au/forum...016/07/217.jpg

http://www.nissanpatrol.com.au/forum...016/07/218.jpg

http://www.nissanpatrol.com.au/forum...016/07/219.jpg

It's a BEAST!!

Sent from my iPhone using Tapatalk cause AB turned it back on!!
20th July 2016, 10:00 AM
Winnie

Are you going to have this on your car at Licola?
20th July 2016, 05:47 PM
BigRAWesty

Quote:

Originally Posted by MudRunnerTD

Good on you Paul.

I had a chance to unpack my new light on the weekend and took a couple of pics.

Dam you. Now I need one for the gu..
Might throw the aurora on the falcon...
26th July 2016, 11:26 AM
DX grunt

Quote:

Originally Posted by MudRunnerTD

Good on you Paul.

I had a chance to unpack my new light on the weekend and took a couple of pics.

Just ordered mine. Hurry up please, postie. lol

Still got my 40" Aurora @ 200w. Looking forward to seeing the 340w hooked up and operating. At this stage, I'll be hooking up both. Most of my 'near misses' have been unexpected appearances from either the left or right hand side of my vehicle, not the front. I need to check out the flood spread on the newbie.

I'm still very aware of the brightness of the Aurora and Extreme brands, and will be driving and using them responsibly. The last thing I want to do is to put somebody off the road, due to their brightness.

Take care out there.

Rossco
26th July 2016, 12:49 PM
MudRunnerTD

Quote:

Originally Posted by Winnie

Are you going to have this on your car at Licola?

No mate, thought about trying to get it fitted to the GUIV but did work on the GQ instead, really need to get it going.
26th July 2016, 01:52 PM
sooty_10

Will be interesting to hear a full comparison report once you get it up and running. Looking at a roof mounted bar in the not to distant future.

Sent from my SM-G925I using Tapatalk
27th July 2016, 01:56 PM
mudski

I have one on back order with Paul. Expecting them in October... @MudRunnerTD Can you measure the height of this light with the brackets on please? I want to make sure its going to fit on the bottom side of my roof rack. I'm sure it will as I have a double row one there now. Just want to make sure....
Cheers.
27th July 2016, 07:48 PM
Lights

Quote:

Originally Posted by mudski

I have one on back order with Paul. Expecting them in October... @MudRunnerTD Can you measure the height of this light with the brackets on please? I want to make sure its going to fit on the bottom side of my roof rack. I'm sure it will as I have a double row one there now. Just want to make sure....
Cheers.

I can have a measurement for you by tomorrow if you don't hear from Darren.
27th July 2016, 08:04 PM
mudski

Quote:

Originally Posted by Lights

I can have a measurement for you by tomorrow if you don't hear from Darren.

Yeah if you dont mind Paul. Mudguts is obviously busy packing for our weekend.

Sent from my SM-P600 using Tapatalk
27th July 2016, 08:27 PM
MudRunnerTD

lol. Paul if you can measure that would be awesome mate, i am pretty crook and trying to stay in the warm as the cold air into the lungs is knocking me about. I would have go out to the shed and bolt up the mount (not a big Job). will only take you a second in the shop tomorrow though.

Sorry Mark, I'm knackered mate.
27th July 2016, 08:45 PM
mudski

No probs Darren. Thought you were busy doing something. ... Seems like everytime i see you your crook mate.

Sent from my SM-P600 using Tapatalk
27th July 2016, 09:09 PM
MudRunnerTD

Quote:

Originally Posted by mudski

No probs Darren. Thought you were busy doing something. ... Seems like everytime i see you your crook mate.

Sent from my SM-P600 using Tapatalk

Kids in Daycare syndrome mate. its a killer.
28th July 2016, 01:29 AM
Sprock

Bloody daycare is the hub of all diseases mate 👎🏼 I've got 5 kids so I know ALL about it 😳
28th July 2016, 06:25 AM
Winnie

Amy works in daycare and she always cops it too
28th July 2016, 12:31 PM
Lights

Quote:

Originally Posted by mudski

I have one on back order with Paul. Expecting them in October... @MudRunnerTD Can you measure the height of this light with the brackets on please? I want to make sure its going to fit on the bottom side of my roof rack. I'm sure it will as I have a double row one there now. Just want to make sure....
Cheers.

Total height including mounting feet is 89mm.
28th July 2016, 08:57 PM
mudski

Quote:

Originally Posted by Lights

Total height including mounting feet is 89mm.

Sooo. That means you have one there with my name on it your using for measurement? [emoji1]

Sent from my SM-P600 using Tapatalk
28th July 2016, 09:20 PM
MudRunnerTD

Quote:

Originally Posted by mudski

Sooo. That means you have one there with my name on it your using for measurement? [emoji1]

Sent from my SM-P600 using Tapatalk

Nah he only has a little on there mate, I think it's 12" or something. Same mounts though.
28th July 2016, 09:23 PM
mudski

Quote:

Originally Posted by MudRunnerTD

Nah he only has a little on there mate, I think it's 12" or something. Same mounts though.

And you had to ruin it for me didnt you. Lol.

Sent from my SM-P600 using Tapatalk
28th July 2016, 09:38 PM
MudRunnerTD

Quote:

Originally Posted by mudski

And you had to ruin it for me didnt you. Lol.

Sent from my SM-P600 using Tapatalk

Nah mate be happy cause ......... I got one!!!!! :p
4th August 2016, 02:07 PM
sooty_10

@Lights I'm currently searching around looking at a light bar to go under my rhino HD roof bars. At the highest point on the roof I have approx 50mm to the bottom of the bar. I'm looking at your 40" Aurora style 200w bar which has a height of 44mm. Are you able to measure the overall height for me using the slim bracket it comes with. Also how much total $$ delivered to bendigo area.

Sent from my SM-G925I using Tapatalk
8th August 2016, 10:33 AM
Lights

Hi.
The overall height will be approx. 47mm with the slimline feet. Freight to Bendigo will be $10

Cheers,
Paul

Show 40 post(s) from this thread on one page