Originally Posted by
mick.
I've spent all last week and up until today rewiring and moving my compressor as the wiring which was installed by the shop that fitted it was half the size of what it was supposed to be. I also rewired my reverse lights/ work lights so there now on a 3 way switch. One side of the switch is for just the standard reverse lights, the middle is off and the other side brings on 100 watts of LEDs for camping which are also wired though a dimmer switch. I also rewired the led strips so there a little neater, also wired up the reverse camera so it can be also switched on and off my a switch in the 4wd or operate as normal when in reverse, replaced my spotlight switches with neater switches and also fitted a bigger isolator switch for the winch, replaced the alternator with something a little bigger and did a general tidy up of all the wiring.
This was supposed to be all finished last weekend but I had to respray a mates Patrol which had just been cut into an extra cab which I promised I'd do it as soon as it was finished. I only had a weekend to rub it all down, fully prime it, and respray it all inside and out including engine bay and inside cabin. So the last couple of weeks all I've done is work on patrols.:rolleyes:
Cheers Mick.