Printable View
pulled it apart thinking just grease some bushes ...... yeah right there was no bushes and it had worn nearly 5 mm into the housing... time to weld in some washers. made some bushes from some plastic put it all back with some grease and done, no more squeak for awhile. when i figure out how to post photos from my phone i'll put some up.
Attachment 63301Attachment 63302Attachment 63300Attachment 63303Attachment 63299
blew the a/c pressure switch .... no a/c till i can source a replacement. not fun when its 35+ .... nearly made the temp gauge get to 1/4.... nearly
changed the thermostat the old one was seized open... the long bolt was rusty but it came out in one piece. the needle got off the cold line and it seems to drive a little nicer with less smoke.
central locking kit is halfway in and hands free has just arrived.. more work
and yes my GQ will have everything when i'm done... reverse cam dash cam
central lock finished dash cam reverse cam installed, swivel hub rebuild done both sides. no pics hands were too dirty to pick up the camera.
nice newish seat for me Attachment 63711
Attachment 63712 found these too not yet on but thats later.
hmm leaking clutch slave.... looks like i need a new one. a job to squeeze in tomorrow
ok so don't know why so many people have problems bleeding the clutch ... piece of cake. after the aust day trip washed out headlight all nice and clean again. washed out the foot well and under the car( i love vinyl )
hoping to fit my new 2nd hand headers tomorrow night. then onto new spring mats, coolant overflow. and seal up washer bottle again, and a new rear wiper blade.
ok so 1 stud and 2 bolts later. the extractors are on. man that was some effort. package arrived while i was working on it so gotta get that from post office