I've plumbed up the air lines, Matfew is kindly helping with all switches and wiring this week mate.
Printable View
I've plumbed up the air lines, Matfew is kindly helping with all switches and wiring this week mate.
Like the idea with the hook Mark, but is the hook big enough????? What a monster.Quote:
Originally Posted by MB
No struggling with double trunk protector ends now mate :-)
Not a fan of where you have your hook hanging @MB when your winching in the final amount you will put load on that. Chances are that shackle will break and or the chain will stretch. If you end up going 24v then it won't stand a chance.
The Run On on a Himount is pretty full on mate, nothing like a low mount. In 24v it's full on. You might have seen the comp truck mount a "winch dildo" to their car hi up in PU flex to take up the load.
I would pull it up around your bar. If your worried about your paint them wrap it in some tape. It will pull hard mate.
Cheers Daz, appreciated mate. Don't believe it would have been an issue with its old 2.5hp but now the 6hp Iskra/Mahle your advice makes great sense :-)
I used to use a 10mm thick rubber O ring out of a 300d storm water pipe which wrapped around the top bar and it worked great for a couple of years.Quote:
Originally Posted by MB
I have a winch dildo going on the GQ now
Bolted the bonnet back on, due 2 my mechanic's workers not bothering 2 bolt it back on before sending it back 2 me......
Pretty crappy thing 2 bolt up by yourself!!!
on the outside of the chassis and body it might squeeeeze in up the front end.Quote:
Originally Posted by PeeBee
If its a ute easier eh
Did they send it back to you with the spark plug tip removed?Quote:
Originally Posted by NissanGQ4.2
Sent from my SM-G935F using Tapatalk
TJM sell them they are suppose to be Plasma friendly.Quote:
Originally Posted by MB
Much smoother than the yellow latch lock I brought from the sling place