Looks good. I like matched body parts mire than black. Was the first thing I did when I got the eb falcon.. LolQuote:
Originally Posted by Stropp
Printable View
Looks good. I like matched body parts mire than black. Was the first thing I did when I got the eb falcon.. LolQuote:
Originally Posted by Stropp
Sexy stropp. Very sexy.
How much that cost you ?Quote:
Originally Posted by Stropp
Ordered new body mounts.
Geeze owning a business does pay off.
Over $100 Off the closest eBay listing threw account with patrol'a'part..
Cheering..
Crikey that is clean...... do you go 4wding????? wish my engine bay was that clean!!!Quote:
Originally Posted by menace 2
The rubber strips (white) between body and flares $549 plus the flare repair, paint and fitting $700 :(Quote:
Originally Posted by lucus30
Holy crap batman......... KaboooshQuote:
Originally Posted by Stropp
Yeh didn't know the cost of the rubber strips until the old ones were off, they called me straight away as they couldn't believe the cost!Quote:
Originally Posted by Clunk
Also fitted the 75 ltr sub tank and opposite lock bullbar :) just need the solar panel frame made up and wired up and that should be all the major work done ready for the Simpson :)
Mate,
They are for placing the nuts in place inside the chassis
Nearly got my rear drawers sorted out
Fitted my new HH goodies :)
http://i1222.photobucket.com/albums/...207_090732.jpg
Will be testing them out tomorrow down at me old favourite spot. POWERLINES
Basically finished my drawers
Rough- Hell yeah
Fit for purpose- Yup
Strong- ken oath
Attachment 37733Attachment 37734Attachment 37735Attachment 37736
ol aggie wont know herself, no rust and now wearing drawers :) she is getting modest in her old age.
Quote:
Originally Posted by Stropp
I know shes getting spoilt. Got a big arsed bit of rust top left rear roof that's bogged at the moment but will need welding sooner rather than later. Aircon repair will be next on the list also
Good thing you have drawer written inside so you know what it is when you open it.Quote:
Originally Posted by growler2058
it certainly helped me!!!!!!!!Quote:
Originally Posted by TPC
Quote:
Originally Posted by growler2058
Looking good g man..
I started to paint this sound deadening paint into the rear 1/4's
Attachment 37755
Shoit it's thick..
And sticky..
Wear gloves..
Those spiky plants could be planted out instead of playing with your carQuote:
Originally Posted by growler2058
nah not yet mate...putting it together to long term tour...but hope to eventually..the engine bay was pretty clean when I got it...with all the head and manifolds off it made it easier to detail it..plus the exhaust is new to help it look better...but I have always been fussy with engine bays....below is the engine bay of my last project I put together..Quote:
Originally Posted by Bloodyaussie
anyway back on subject
today put new fan and new viscous clutch back on..did the timing..oil change and filters...took it for a run
Those pics will get a few guts on here excited.Quote:
Originally Posted by menace 2
How long have you had it?
Quote:
Originally Posted by TPC
I sold it to buy a new motorbike TPC...It was just one of the classic cars I put time and money into...It was originally an ex PMG ute....I bought it already painted red and with the 351 windsor in it and then went from there....I had it for about 2 years after it was finished....couldnt park it anywhere...everything in the end was genuine GT on it including the interior...so after having to get a third fuel cap and taking it off when parked and leave it in the cab....it became a pain in the arse
bugger me , now everyone wants to steal GQ's ...lolololololololol
f.o. @&$*..Quote:
Originally Posted by taslucas
Attachment 37765
Not me the better half getting the inside clean last weekends bribie sand out , leather protect done vacuumed , all so it can go to the painters on monday looking clean , and to straddie next weekend , the joys of her not letting me near her new vacume
I started fitting out.
Got middle door panels and 6x9 speakers in, and fitted D/S door panel and New 6.5" 3 ways..
It sounds awesome..
New bullbar is on, I think it has better approach angle than the old one.
Got it dirty
http://i1222.photobucket.com/albums/...208_174739.jpg
Oh and broke it. Started to overheat and just keeps heating up.
Just my f@cking luck over 100ks from home too
Thats not good bloke. Probably got mud blocking your radiator. Hopefully nothing a wash cant fix.Quote:
Originally Posted by Shaun 4x4
Yup mud in the radiator can you find a servo and hose it out. It will take heaps, may even need to pull the radiator out. Had to on my GQ and wifes Prado
Hope so. But the radiator is full. But the overflow bottle and the coolant refrigerant is empty to and they where full before I left. So not sure.
Did you go nose down into a mud hole?Quote:
Originally Posted by Shaun 4x4
Last time I went through a mud hole at loveday my car overheated along with everyone else's that went in it.
Found that I'm missing the NVA off the Runva solenoid on my bullbar.
All I have is RU.
LOL
Yer I did.Quote:
Originally Posted by TPC
Underneather is completely caked with mud but the radiator itself seems pretty clean.
Looks are deceiving mate. It sits between the radiator and shroud. I'd unscrew the shroud and hose it threw..Quote:
Originally Posted by Shaun 4x4
It might not seem much, but could be blocking 25% or more..
Will do. What shroud are you talking about tho?Quote:
Originally Posted by Westy's Accessories
it will be the one on the engine side, around the fan. IMHO if you have/can get it home, pull the rad out and spend some good time thoroughly hosing out the fins (front to back), you will be surprised how much junk comes out.Quote:
Originally Posted by Shaun 4x4
Yer had it towed home. Will do this on the weekend as ive decided once Ive cleaned it all gonna get the system flushed out anyway
drove to work :( Bugger cleaning that rig Shaun lol
See how she goes after the clean out, and then flush if still running high.Quote:
Originally Posted by Shaun 4x4
Just take the radiator out and take it in to a radiator shop, for about $70 they will flush it completely.Quote:
Originally Posted by Shaun 4x4