What has made you Angry Today???????

Quote:

---

Originally Posted by Bloodyaussie

Body mounts are flogged out they cost a fortune..... blah !!!!

The noise and knocking has been getting worse and yesterday I spent ages cleaning under my car and of course it was clunking its head off after.

Nearly $400 is just too much right now.

---

Got a part number?

Quote:

---

Originally Posted by Bloodyaussie

Body mounts are flogged out they cost a fortune..... blah !!!!

The noise and knocking has been getting worse and yesterday I spent ages cleaning under my car and of course it was clunking its head off after.

Nearly $400 is just too much right now.

---

I may have 50mm poly blocks [dark blue] here ,you could get them
turned down to say 35mm to give a small increase in height, and front and rear bars
wont need altering

Quote:

---

Originally Posted by Bloodyaussie

Body mounts are flogged out they cost a fortune..... blah !!!!

The noise and knocking has been getting worse and yesterday I spent ages cleaning under my car and of course it was clunking its head off after.

Nearly $400 is just too much right now.

---

Mine has needed new body mounts for a couple of years... I'll get around to it.

Quote:

---

Originally Posted by Bloodyaussie

Which business. ?

---

One from Tassie.
Font want to name them just yet, but if it goes pear shaped I have no problems in name n shame.

Quote:

---

Originally Posted by sooty_10

You would think they would have more than 1 gauge in stock should just send that to you straight away express post.


Sent from my SM-G925I using Tapatalk

---

Apparently that was the last one and they did say that it will be expressed as soon as they get it.

Quote:

---

Originally Posted by Hodge

Exactly my thoughts. Their stuff up.
.

Tapatalked from S6

---

Yes and they admitted to it straight up.

Quote:

---

Originally Posted by mudski

Lol. I remember doing the same last year to two buyers. A big brain fart moment. anyway it turned out to be quite funny, one item was $160, the other $70. The buyer of the $70 got the $160 and vice versa. The $70 buyer knew what he got and still in good faith told me of the mess up and was all good about it. Sent it back and I expressed him the right part. The other guy, who paid $160 and only got the $70 item, didn't say boo. Weird. His was express too and I hadn't heard from them for over a week.
So I contact him, he replies he never got the item. SO I contact Aus Post, he's signed for it. AP send me a copy of the signature, it looks like the guys name, the buyer says it wasn't him. I said o.k you now need to go to the police station and sign a stat dec and email to me so a police investigation can start. I called his bluff...
Never heard from him since. Then, three month later the same guy orders the exact same parts from me and pays $160 again! I sent him a note in the parcel asking him to send back the incorrect parts from three months ago and I'll give him a refund. Still nothing.
I had to laugh about it. I messed up, I tried to resolve the issue. The buyer thought he'd be smart and get a freebie, it didn't work and he ended up paying twice.

The amount of times people try things on me is amazing.
A person bought a heater fan resistor from me. Then sent me a message saying its failed after two days and he wants warranty without posting the old one back. He said he doesn't have too. Haha! He also mistakenly said, this is the second one thats failed in a month. I said well there is obviously an issue somewhere else causing this and you will need to get this sorted by an auto elec. And for him to post the dud one back. He finally did, but sent me his original one, and it was covered in dust and the factory build date stamped on the unit was out of line with all my other resistors.
I told him this, showed him a photo of his dud one covered in dust and said there is no way this resistor can get this amount of dust on it just from two days of use, plus the stamped numbers. I said to post the one I sent back and I will refund you. Guess what happened? No response.
I even now mark some items with a pen so you can only see it under a black light. Just to cover myself.

---

That's my concern. That the other buyer will keep it. If they still haven't got it, I'll ask for a refund and get it elsewhere.

I have sent them another message and will follow up with a call if if I can find their number.


Have also sent back my UHF radio some sort of power issue still under warranty so we'll see what happens with that one.

And now the hospital wants to charge us an extra $800 for my son's op that he had 2 weeks ago.

Have spoken to the doctors practice and they are going to follow up for us.

Just got off the phone and the seller has already refunded my money.

The other guy is being a dick about it. Some young guy that takes photos of cars drifting and doesn't have a printer....
I'll sent it back at my easiest opportunity, as I work 12 hours. He told the seller.

Boo woo. I do 12 hour nights with 2 kids.

Anyway I have a look tonight where else I can get one.

Apparently that type maybe discontinued.

Happy to mention the seller, as he isn't the problem.

Tas autosports

Quote:

---

Originally Posted by Winnie

Mine has needed new body mounts for a couple of years... I'll get around to it.

---

Mine is clanging and clunking like mad.... oh did I mention the creaking as well.

No Matty I dont know the part number but I am sure it is an easy find.

A few people have mentioned poly blocks.... what would they be like?

cheaper than $400 thats the only reason I mentioned it, when you get around to it [when ever]
and need large washers made up give us a yell, Ill get some cut to suit

Quote:

---

Originally Posted by Bloodyaussie

Body mounts are flogged out they cost a fortune..... blah !!!!

The noise and knocking has been getting worse and yesterday I spent ages cleaning under my car and of course it was clunking its head off after.

Nearly $400 is just too much right now.

---

The Old Trol's body mounts are stuffed too, I just cut some rubber washers from some inner tube and bunged them in. I know it means doing the job twice but it works if funds are scarce.

Quote:

---

Originally Posted by mudnut

The Old Trol's body mounts are stuffed too, I just cut some rubber washers from some inner tube and bunged them in. I know it means doing the job twice but it works if funds are scarce.

---

@ mudnut would this work using some 6mm conveyor belting?
If it lasts another 12 months till funds are there then it may be viable