Oil catch workn a treat...
http://www.nissanpatrol.com.au/forum...015/07/238.jpg
Sent from my SM-N915G using Tapatalk
Printable View
Oil catch workn a treat...
http://www.nissanpatrol.com.au/forum...015/07/238.jpg
Sent from my SM-N915G using Tapatalk
And the oil level is the same
Can you put a pic of your ECU-talk after its warm and idling please
http://www.nissanpatrol.com.au/forum...015/07/239.jpg
Sent from my SM-N915G using Tapatalk
Thanks , keep an eye on the rear IC hose they have a habit of blowing off.
Ye 26psi will make it do that... been meaning to upgrade hoses and clamps fora while nw just cnt be bothered...[emoji12]
Sent from my SM-N915G using Tapatalk
How many km's have you done with the catch can installed? That is my last thing to do to complete "NADS"
Also what intercooler is that? I need to piss the crap factory one off and get one with welded tanks.
No too sure on kms.. maybe 1000km...
Sent from my SM-N915G using Tapatalk
Fitted it pretty much as soon as i got it... while doing ur nad mods.. if not already done.. id be pulling the manifold off and cleaning the blowby sludge inside.. then refit with in line catch can.. dawes n needle valve.. blockd egr and clean maf sensor...
Sent from my SM-N915G using Tapatalk
Cheers.. Yeah i have EGR Block, Dawes/Needle etc.. just need the catch can.. Might pull the manifold off but probably not. My engine doesn't seem to breath to heavy so hoping it isn't to bad.
How many ks has urs done? Also upgrading intercoolr is worth lookn into.. i pulld my manifold at 180k is was easily half blockd with black sludge...
Sent from my SM-N915G using Tapatalk
2003 with 140,000km. My cooler has some oil on one of the corners so it is leaking.. And any intercooler with crimped tanks is utter rubbish!
A factory replacement wiv the end tanks tig welded are more than suffice.. my egts dnt go over 400 period.. thats even limiter bashing in the soft stuff...
Sent from my SM-N915G using Tapatalk
Pretty close in most values, yet to do my intake .Quote:
Originally Posted by mullet_hunter
Patrol wasnt really warm in that pick ,
it was after a quick sqirt down to the supermarket
I think the MAF value may be lower with the larger intake???
There a good bit of kit.. save so much time trying to troubleshoot something.. plus i like hw it shows u what everythng is doing in real time.. my boost gauge and what my boost sensor read out are bang on..👌
Sent from my SM-N915G using Tapatalk
Will be forking over some hrd earned in the next few weeks for some new shoes... i like the look of these.. and have only heard good feedback...
http://www.nissanpatrol.com.au/forum...015/07/253.jpg
http://www.nissanpatrol.com.au/forum...015/07/254.jpg
Sent from my SM-N915G using Tapatalk
Also keen to get get a rear cargo shelf in the rear above my drawers... i could bend/weld me up one but not to sure about legalities... i like the look of this setup..
http://www.nissanpatrol.com.au/forum...015/07/255.jpg
Sent from my SM-N915G using Tapatalk
Im making a shelf ATM no cetre upright though
Im loving that rubber $$$$ per corner ???
I have a 15" flip down I might mount on it
Cheapest ive found is a lazy 360 a pop.. otherwise most bob janes will do for 415 a corner... all the trophy trucks are running these... mint in sand and quiet on rd.. and aparently go pretty good in the dirty stuff aswell...
Sent from my SM-N915G using Tapatalk
I was keen for a set of these.. But changed my mind after hearing feed back from people i know...Quote:
Originally Posted by mullet_hunter
Yeah there good in the sand and quiet on the road. But add wet roads and there like a racing slick.... Pretty average in the mud as they don't self clean to well..
Shame because i had my heart set on them.. but decided to look for something else. :(
I think u will always get mixed feedback.. some good some bad.. have u seen the youtube videos of them? Cause there disgned so they self clean and perform in the wet too.. il try find a link..
Sent from my SM-N915G using Tapatalk
General Grabber.flv: https://youtu.be/d9kdfawq2dY
Sent from my SM-N915G using Tapatalk
A mate almost ended up in a guard rail a couple of times in the wet.. His Wife drives the car with the kids etc in it.. they only had 5000km on them and flogged them off and went back to KM2's As he felt they felt better on the road then the Grabbers...
Each to there own tho, If you do get some let us know how they go!
Ye im hearing ya mate.. thats not good at all... im all about saftey first especially with the family/kids...but most tyres are average in the wet especially if you lock up the brakes...
Sent from my SM-N915G using Tapatalk
Finally mounted my solar panels..
http://www.nissanpatrol.com.au/forum...2015/08/17.jpg
http://www.nissanpatrol.com.au/forum...2015/08/18.jpg
http://www.nissanpatrol.com.au/forum...2015/08/19.jpg
http://www.nissanpatrol.com.au/forum...2015/08/20.jpg
Sent from my SM-N915G using Tapatalk
Wired up my led strips..
http://www.nissanpatrol.com.au/forum...2015/08/21.jpg
http://www.nissanpatrol.com.au/forum...2015/08/22.jpg
...
http://www.nissanpatrol.com.au/forum...2015/08/23.jpg
http://www.nissanpatrol.com.au/forum...2015/08/24.jpg
Sent from my SM-N915G using Tapatalk
Getn new rums n tyres and streight through zaust nxt week...yeow..
Sent from my SM-N915G using Tapatalk
Looks like my boy
Not a fan of lights where you work from the rear
of the Patrol it attracts way tooo many insects imo
Solid bluey mate... ye them lights are just for reversn at night... ordered me some neg 22 d shaped sunnys and some 33x12.5x15 gen grabb slr to wrap them... keen to see how they go..
Sent from my SM-N915G using Tapatalk
Also i seen mdc doing foof top tents n anex for 7 hunji... cnt go wrng for that price.. might grab one or 2 depending what the boss says...
Sent from my SM-N915G using Tapatalk
Where are you getting your exhaust from??Quote:
Originally Posted by mullet_hunter
I ordered one from 4wdShitaCentre last weekend.. heard nothing from them all week so i sent them an email on Friday asking what the go is.... They got back to me telling me there out of stock... and 1-2 weeks till they have them in stock again and will send mine out then... So pretty much 3-4 weeks after i paid for it i will get it... Not impressed not impressed at all!!! But i guess it's to be expected to anything connected with Tigerz11
Ye thats a bummer considering there dominator exhaust systems are made in Melbourne by burkley... a good product for the price tho.. put one on my bros hilux.. good fitment/quality.. il be getn my exhaust frm playtime auto parts.. 530 to my door.. 3 inch system with the rear muffler changed out to a hotdog.. pyro bungs welded in etc...
Sent from my SM-N915G using Tapatalk
Yeah i looked at the Playtime and DEA ones... Domin8r look to have better hangers and 4 bolt flanges with the Pyro/AFR bungs in them out of the box... But at end of the day it's just a bit of pipe.. As long as it fits good... $530 to your door is cheap.
EDIT:
I ordered one of them coolers with the welded tanks the other day... I bet that rocks up before the exhaust... lol
Will throw up some pics and a vid or too of befor and aftr once i hav evrythng all fittd upp...
Sent from my SM-N915G using Tapatalk
warming up a tad over here so the larger intake will be fitted soon,
like you sooooo much to do soooo little time lol
You got me itching for my new exhaust... So went and removed mine from the diff back hoping for more noise.... haha
No real difference in noise or turbo whistle.. damn it... Oh well, one less part i'll need to remove once the new one comes!
Haha.. ye i knw its a good fealn when u knw ur got goodies ordered.. even bettr fealn when they rock up... will be alot bettr than standard.. bettr on the juice.. better power and a better note..Quote:
Originally Posted by Softy
Sent from my SM-N915G using Tapatalk
If you are changing the dump pipe make sure you spray heaps of WD40 on the nuts before trying to remove them, it will hopefully stop you from snapping one of the studs
We had an exhaust company in the family for close to 20 years.. So i know a few tricks... lol
I am dreading the heat shield after all i have read about removing it... But looking at it.. it can't be that hard.. (famous last words)
The dreaded heat shield... Cut/smash it off.. The last 2 bolts at the back are the worse. Lol...Quote:
Originally Posted by Softy
Hopefully my exhaust rocks up on Friday so I can fit it the weekend...