Picked up a cross country cooler for my zd30 800 bucks off a good bloke from this forum
Printable View
Picked up a cross country cooler for my zd30 800 bucks off a good bloke from this forum
While at work, I was learning to weld using a mig welder. For my first project, I decided to make a fishing rod holder for Theo. Got it all fitted and ready to roll for when I actually buy some rods haha
replaced broken rear tail light in bar, and finished buffing the scratches out of it.
ozz
Fitted front radius arms back in this evening . new rubber bushes . happy days .
Fitted a 3inch Redback exhaust, well, finished on Tuesday it was.
http://img210.imageshack.us/img210/2...31large.th.jpghttp://img33.imageshack.us/img33/733...34large.th.jpg
http://img684.imageshack.us/img684/5...43large.th.jpghttp://img38.imageshack.us/img38/817...46large.th.jpg
Finished off my accessory plate in the rear...
http://img13.imageshack.us/img13/323...0largec.th.jpg
fitted another ciggie socket in the blank in the console...
http://img88.imageshack.us/img88/813...41large.th.jpg
and fitted the recovery plates yesterday.
http://img221.imageshack.us/img221/7...40large.th.jpg
Now for the next project...
gave the truck a steam clean underneath and under the bonnet, just to see what it had under the muck!
Put a 100watt hid kit in my light force man they are awesome!!
Connected the blue/white wire that controls the auto-antenna that Autobahn couldn't be stuffed doing when they put the stereo in.:furious:
Packing up the 'boot' with stuff the removalist won't take.
changed the blinkers and parkers over to leds in bull bar.