Turbo Upgrades for the GUIV TD42Ti

Printable View

Show 40 post(s) from this thread on one page

28th November 2016, 09:57 PM
MudRunnerTD

Quote:

Originally Posted by AB

Are we all set for the weekend Dazz?

Looking forward to redlining a GU ;)

No I'm really not but I'm working on it.
29th November 2016, 07:23 PM
MudRunnerTD

Spent an hour and a half at the Pirtek counter this afternoon. I think I'm nearlly ready!!!
29th November 2016, 07:23 PM
MudRunnerTD

Spent some money!!!
29th November 2016, 07:49 PM
AB

Quote:

Originally Posted by MudRunnerTD

Spent some money!!!

Try putting a long motor in!!!

Members contribution... I simply wouldn't be were I am.

Our new vendor DavesStuff after the engine was bought was a god send!!!

I easily spent an extra $1500 to safely get my car back on the road!

I'm actually looking forward to putting this in as I did a lot of trial and error getting mine sorted so yours will be a breeze!

Bahahaha famous last words ;)
29th November 2016, 07:50 PM
AB

Quote:

Originally Posted by MudRunnerTD

Spent some money!!!

Yeah I told ya, I guessed your exact spending to a tea. Phantom costs of getting your system upgraded unforeseen $$$
1st December 2016, 05:39 PM
MudRunnerTD

Getting ready!!

Lost most of today with a Burst Hot Water system at home damn it!! Timing is terrible! That near $2k I can't spend on an airbox and snorkel damn it!! Oh well.

So took the GUIV into the exhaust shop today, put it on the hoist and left with this little jigger!

http://www.nissanpatrol.com.au/forum.../2016/12/7.jpg

http://www.nissanpatrol.com.au/forum.../2016/12/8.jpg

They also supplied me new exhaust studs.

I think I'm nearly ready!!

Sent from my iPhone using Tapatalk
1st December 2016, 05:40 PM
MudRunnerTD

Booked the car in for 8:30 am Monday for a new extended Dump pipe.

Sent from my iPhone using Tapatalk
1st December 2016, 06:37 PM
AB

Quote:

Originally Posted by MudRunnerTD

Getting ready!! Lost most of today with a Burst Hot Water system at home damn it!! Timing is terrible! That near $2k I can't spend on an airbox and snorkel damn it!! Oh well. So took the GUIV into the exhaust shop today, put it on the hoist and left with this little jigger! They also supplied me new exhaust studs. I think I'm nearly ready!! Sent from my iPhone using Tapatalk

Sweet, so we can drive it around worry free Saturday sounding like a possessed lawn mower, nice!!!
1st December 2016, 08:15 PM
Hodge

Quote:

Originally Posted by MudRunnerTD

put it on the hoist and left with this little jigger!

http://www.nissanpatrol.com.au/forum.../2016/12/7.jpg

http://www.nissanpatrol.com.au/forum.../2016/12/8.jpg

Very keen to find out what results you get in the end Darren.
ON a side note what is this jigger we're looking at here?
1st December 2016, 08:25 PM
AB

Quote:

Originally Posted by Hodge

Very keen to find out what results you get in the end Darren. ON a side note what is this jigger we're looking at here?

He's just bought a temporary dump pipe so the exhaust faces straight down so when we put the turbo on the weekend we can drive it around until Monday where they'll use that bend but fit it properly to the exhaust.
2nd December 2016, 05:04 PM
MudRunnerTD

STEP AWAY FROM THE DESK!!!!!!

What a Week!!

Well lets do this!..

I have decided to add to the list a New Radiator ($430) a New Hi Flow Thermostat from @Robo's thread. I bought some more Silicon bends today as the ones i ordered off ebay are a no show damn it! Lets get busy!!
2nd December 2016, 08:49 PM
AB

1 Attachment(s)

Quote:

Originally Posted by MudRunnerTD

STEP AWAY FROM THE DESK!!!!!! What a Week!! Well lets do this!.. I have decided to add to the list a New Radiator ($430) a New Hi Flow Thermostat from @Robo's thread. I bought some more Silicon bends today as the ones i ordered off ebay are a no show damn it! Lets get busy!!

Sorry mate, we can't make it, feeling a bit sick.
2nd December 2016, 08:50 PM
rusty_nail

Yep crook as

http://www.nissanpatrol.com.au/forum...2016/12/17.jpg

Sent from my E6782 using Tapatalk
3rd December 2016, 02:19 AM
MudRunnerTD

hope ya choked!! I am Knackered!!..Hitting the shower, see you in a couple of hours boys. Sorry AB not where we wanted to be mate! Bloody Turbo! Who's idea was this!
3rd December 2016, 05:18 AM
AB

Quote:

Originally Posted by MudRunnerTD

hope ya choked!! I am Knackered!!..Hitting the shower, see you in a couple of hours boys. Sorry AB not where we wanted to be mate! Bloody Turbo! Who's idea was this!

uhh ohh!!!

We're up mate, leaving soon, super early, white with one!
3rd December 2016, 06:26 AM
Rossco

Good luck and have fun with it boys ☺
3rd December 2016, 06:31 AM
MB

Quote:

Originally Posted by Rossco

Good luck and have fun with it boys ?

I'm more worried about poor Rusty, think AB said he's working the night shift tonight also, what a legend!
3rd December 2016, 07:44 AM
Winnie

Enjoy the day guys and make sure you redline every gear on the test drive!
3rd December 2016, 11:09 AM
AB

1 Attachment(s)

Not having a fun day at all, Darren stuffed up and missing a major part that no one has.

Currently MacGyvering something up.

Hopeless!!!
3rd December 2016, 12:03 PM
MB

Ripper beard you got going there these day Dazman! Tis the season to be jolly :-) http://www.nissanpatrol.com.au/forum...2016/12/23.jpg

Sent from my iPhone using Tapatalk
3rd December 2016, 01:11 PM
Winnie

Quote:

Originally Posted by AB

Not having a fun day at all, Darren stuffed up and missing a major part that no one has.

Currently MacGyvering something up.

Hopeless!!!

Is this the bit??

http://www.nissanpatrol.com.au/forum.../2016/12/1.gif
3rd December 2016, 03:43 PM
MudRunnerTD

Big Shout out to Nic and Andy, been a big 24 hours here. Not over yet but Andy and Nic were a huge help today. I still have a fair bit to do before I turn the key but we are at the pointy end.

Thanks guys, appreciate your effort.
3rd December 2016, 03:49 PM
MudRunnerTD

Quote:

Originally Posted by MudRunnerTD

Getting ready!!

Lost most of today with a Burst Hot Water system at home damn it!! Timing is terrible! That near $2k I can't spend on an airbox and snorkel damn it!! Oh well.

So took the GUIV into the exhaust shop today, put it on the hoist and left with this little jigger!

http://www.nissanpatrol.com.au/forum.../2016/12/7.jpg

http://www.nissanpatrol.com.au/forum.../2016/12/8.jpg

They also supplied me new exhaust studs.

I think I'm nearly ready!!

Sent from my iPhone using Tapatalk

So this Turbo is HUGE!! Let's just say this looks nothing like this now!! Also the fire wall has had some serious loving!
3rd December 2016, 05:34 PM
BigRAWesty

Sounds like you need a backwards manifold.
Or atleast center mount
3rd December 2016, 05:43 PM
AB

Quote:

Originally Posted by MudRunnerTD

Big Shout out to Nic and Andy, been a big 24 hours here. Not over yet but Andy and Nic were a huge help today. I still have a fair bit to do before I turn the key but we are at the pointy end. Thanks guys, appreciate your effort.

You just need to put the IC on, oil drain and boost/pump lines now yeah?
3rd December 2016, 05:58 PM
MudRunnerTD

Quote:

Originally Posted by AB

You just need to put the IC on, oil drain and boost/pump lines now yeah?

Just finished the oil drain. Used the black hose, came up a pissa. I had to remove the drain to cut it but took the opportunity to fit the gasket.

Removed the oil feed hose and got 160mlof oil down it. Bloody hard but got it in. The Instructions say to Fill to overflowing!! And to leave the drain off and turn the engine over until a steady stream come out of the line!!

Need to fit the IC and boost lines and fill with fluid.
3rd December 2016, 06:02 PM
MudRunnerTD

Quote:

Originally Posted by bigguwesty

Sounds like you need a backwards manifold.
Or atleast center mount

Ugg Ugg ugg !

Big Hammer!

Make it fit!

Ugg!
3rd December 2016, 06:35 PM
nissannewby

Umm seems a bit rough mate. I though you owned a grinder and a welder? I have a bigger version of this turbo than you and managed to get the dump to fit with no firewall beating. The 6758 is not a big turbo mate. The factory manifold sits the turbos a long way back. You would have had the same issue with a china 18g. The ufi come with a dump pipe but they are very tight and only juat clear the firewall.
3rd December 2016, 06:36 PM
nissannewby

Quote:

Originally Posted by MudRunnerTD

Just finished the oil drain. Used the black hose, came up a pissa. I had to remove the drain to cut it but took the opportunity to fit the gasket.

Removed the oil feed hose and got 160mlof oil down it. Bloody hard but got it in. The Instructions say to Fill to overflowing!! And to leave the drain off and turn the engine over until a steady stream come out of the line!!

Need to fit the IC and boost lines and fill with fluid.

It will be fine. Just let it idle for a while before revving it.
3rd December 2016, 06:36 PM
rusty_nail

Happy to help dazz, was great hanging out today, always good to see your big woolly head lol.
Can't wait to hear how it goes once it's done!!!

Sent from my E6782 using Tapatalk
3rd December 2016, 06:45 PM
MudRunnerTD

Quote:

Originally Posted by nissannewby

Umm seems a bit rough mate. I though you owned a grinder and a welder? I have a bigger version of this turbo than you and managed to get the dump to fit with no firewall beating. The 6758 is not a big turbo mate. The factory manifold sits the turbos a long way back. You would have had the same issue with a china 18g. The ufi come with a dump pipe but they are very tight and only juat clear the firewall.

Hi mate, yeah I actually did cut the adapter off that bend and cut another 25mm off the bend then manipulated it back on and welded the flange back on. It's a full 3" mandrel bend and it hit by a lot !! It's on a hoist tomorrow for s new dump pipe, I was hoping to use this but he will cut it off and go again. I expect he can jog it up pretty easily. Crazy tight mate!! We maybe bashed the footwell corner back maybe 20mm or so. Tight!

Sent from my iPhone using Tapatalk
3rd December 2016, 06:49 PM
nissannewby

Quote:

Originally Posted by MudRunnerTD

Hi mate, yeah I actually did cut the adapter off that bend and cut another 25mm off the bend then manipulated it back on and welded the flange back on. It's a full 3" mandrel bend and it hit by a lot !! It's on a hoist tomorrow for s new dump pipe, I was hoping to use this but he will cut it off and go again. I expect he can jog it up pretty easily. Crazy tight mate!! We maybe bashed the footwell corner back maybe 20mm or so. Tight!

Sent from my iPhone using Tapatalk

Yeah you can get tighter bends. I used a 3" donut to make mine. It would have been fine to leave off to drive to the exhaust shop.
3rd December 2016, 06:57 PM
rusty_nail

Quote:

Originally Posted by nissannewby

Yeah you can get tighter bends. I used a 3" donut to make mine. It would have been fine to leave off to drive to the exhaust shop.

Andy did say that about a dozen or so times lol, Darren was concerned about getting exhaust on his firewall

Sent from my E6782 using Tapatalk
3rd December 2016, 07:03 PM
AB

Quote:

Originally Posted by rusty_nail

Andy did say that about a dozen or so times lol, Darren was concerned about getting exhaust on his firewall Sent from my E6782 using Tapatalk

He was determined...lol
3rd December 2016, 08:48 PM
AB

1 Attachment(s)

Quote:

Originally Posted by MB

Ripper beard you got going there these day Dazman! Tis the season to be jolly :-) Sent from my iPhone using Tapatalk

You're a wizard Harry!
3rd December 2016, 08:50 PM
MudRunnerTD

Quote:

Originally Posted by AB

You're a wizard Harry!

Shit head.
3rd December 2016, 08:52 PM
AB

Quote:

Originally Posted by MudRunnerTD

Shit head.

It's bloody funny though cmon!!!!

Nailed it!
3rd December 2016, 08:56 PM
MudRunnerTD

Quote:

Originally Posted by AB

It's bloody funny though cmon!!!!

Nailed it!

Hagred!!! Bloody Hagred!
3rd December 2016, 08:58 PM
AB

Gotta love Aussie humour, any possible inkling to put down a mate ;)
4th December 2016, 06:23 AM
Maxhead

Well done lads! I'm glad a got a zd30 CRD and don't need to worry about any of these upgrades=)

Sent from my iPhone using Tapatalk

Show 40 post(s) from this thread on one page