Rockets Wagon

Ah, Ok. Thanks. I had one of them on my Hilux.

Hi Rocket, your Patrol is looking good. What type of headrest screens did you get? Did you put them on the genuine headrest or are they an aftermarket kit?

Cheers
Brad

They are a full aftermarket Zylux 7" system. Cost about $500 about 2 years ago. Good enough for the kids.

Quote:

---

Originally Posted by Rocket55

Thought I'd start off a bit of a build thread on my wagon. It's a 2010 CRD auto with 58,000km on it. It came with a few bits, but is pretty stock. Currently its got 33"AT's, Dual batteries, extra power outlets in the cab and wagon, LED driving lights window tint and that's about it.

http://i1083.photobucket.com/albums/...pscd403575.jpg

http://i1083.photobucket.com/albums/...ps70dd351e.jpg

This weekend I started my mods and I fear it's going to be all down hill from here :tongue:

Started off with an earth strap, nothing to difficult and just easing my way into the Patrol pool starting at the shallow end.

http://i1083.photobucket.com/albums/...pssxa67h6c.jpg

All went well with this, made the engine note change, sounds meatier now and changes gear a bit sharper, go figure.

---

Hey Rocket. Is that a earth from body to frame??? I havent seen that one yet. Might do that to mine. What does it help with?? Great looking build so far.

It sure is. From what I've reasearched and what I can see, Patrols actually don't have an earth that goes between the two. The only wiring between the two is the wiring for the sub tank transfer pump. So if you start earthing spot lights, winches etc. to the bullbar, ie the chassis. It finds its way back through the fuel pump wiring which quickly creates havoc with its operation. Other symptoms that people have reported is bad radio reception and central locking not working. There are others but I can't remember now. Basically if you have some wierd electrical stuff happening, whack an earth in and in a lot of cases most of it will go away.

That's really interesting and handy to know!!! Will have to keep it in mind for future mods

Yes, extra earths from body to chassis are a good idea. The more the merrier!

Bit of an update.

Over the last few weeks I've been working on a Provent 200 catch can install. Can't rush these things. It kinda needed it though

http://i1083.photobucket.com/albums/...ps1ee68864.jpg

With a 2nd battery and ABS, there's not a lot of room left for the can, so it has to sit above the ABS unit in this hole

http://i1083.photobucket.com/albums/...ps8569edc3.jpg

http://i1083.photobucket.com/albums/...ps63e55e00.jpg

Using an existing hole in the firewall and a stud on the plate behind the 2nd battery I made up a bracket

http://i1083.photobucket.com/albums/...psdfce5fc3.jpg

http://i1083.photobucket.com/albums/...psb58dec74.jpg

Installed the can and plumbed it up.

http://i1083.photobucket.com/albums/...ps0e7502ed.jpg

1/2" hose from rocker cover to 1/2" to 1" adaptor then 1" to top port of the can.
5/8" hose from intake to 5/8" to 1" adaptor then to bottom port on can.
12 or 13mm clear hose from bottom of can down through the guard with a Bunnings tap on the end.

http://i1083.photobucket.com/albums/...ps82d686a6.jpg

Final assembly

http://i1083.photobucket.com/albums/...ps9dae128d.jpg

http://i1083.photobucket.com/albums/...psb7969133.jpg

While I was in the fixing mood, I added a dual USB plug in the centre cubby hole to charge the iPad whilst off road. Works a treat and keeps all the cords tidy and not dangling down all over the place (one of my pet hates)

http://i1083.photobucket.com/albums/...ps85df4a6c.jpg

Also threw some ports in the back of the centre console to keep the kids happy

http://i1083.photobucket.com/albums/...ps9aacf3e1.jpg

http://i1083.photobucket.com/albums/...pseaec3bc6.jpg

Hey Rod, Thanks for your help in My Runva Install tonight, glad I took a look at your build as you offered, very impressive, congratulations on a job well done,, but somehow I think I need to add so far... keep up the great work.

Cheers

Dave