The "Tank" - Big, Grey and Ugly ..

Printable View

Show 40 post(s) from this thread on one page

17th May 2011, 08:01 PM
Dark 1

Quote:

Originally Posted by Bigrig

Not really - it's just a heavy front end due to having the second tyre, second gas bottle, storage box, etc on the front. As well as the long draw bar .... packed pretty well, but would only make a few kilos difference no matter how it was packed as I can't put a lot of weight behind the wheels due to the kitchenette.

So sad ... lol ... love that camper though!!!!

We had the camper for a few years & can attesdt to the weight of the unit. She aint light but damn she can take some rough stuff. Can't wait to see some shots of her behind the Tank.
17th May 2011, 08:07 PM
big_fletch

Good to hear rear bar is coming along nicely mate, not long now till its all finished Haha
17th May 2011, 08:19 PM
Bigrig

Quote:

Originally Posted by Dark 1

We had the camper for a few years & can attesdt to the weight of the unit. She aint light but damn she can take some rough stuff. Can't wait to see some shots of her behind the Tank.

They're coming boss - goes in Thursday to get the Anderson plug out the back and the trailer plugs moved up on top of the alloy centre piece - will get a happy snap then!!
17th May 2011, 08:20 PM
Bigrig

Quote:

Originally Posted by big_fletch

Good to hear rear bar is coming along nicely mate, not long now till its all finished Haha

How true!! Cutting tomorrow/Thursday and getting the bottom plate on the quarter panels welded on Friday ... do up the bar work on the weekend, prime and paint early next week, and hopefully ready in time for the cruiser park trip!!!
17th May 2011, 08:24 PM
Sir Roofy

Quote:

Originally Posted by Bigrig

How true!! Cutting tomorrow/Thursday and getting the bottom plate on the quarter panels welded on Friday ... do up the bar work on the weekend, prime and paint early next week, and hopefully ready in time for the cruiser park trip!!!

take a deep breath relax mmmmmmmmmmmmmmmmmm now repeat then cut
17th May 2011, 08:31 PM
Bigrig

Quote:

Originally Posted by roofy

take a deep breath relax mmmmmmmmmmmmmmmmmm now repeat then cut

Measure twice, cut once, take my time ... check, check annnnd check!!! lol
17th May 2011, 08:33 PM
Sir Roofy

Quote:

Originally Posted by Bigrig

Measure twice, cut once, take my time ... check, check annnnd check!!! lol

thats it mate all the best with it
17th May 2011, 08:34 PM
Bigrig

Quote:

Originally Posted by roofy

thats it mate all the best with it

Thanks boss ... here's to hoping!! lol
17th May 2011, 08:42 PM
growler2058

Quote:

Originally Posted by Bigrig

Measure twice, cut once, take my time ... check, check annnnd check!!! lol

and pull ur lume outa the way or you WILL cut it more so the drivers side. Also it would be alot easier to drill a hole in the side of the inner guard to pull the lume back through before you weld the bases on. and remember most importantly dont F!@K it up hahahahahahahahahaha:blowup:
17th May 2011, 08:44 PM
Bigrig

Quote:

Originally Posted by growlers71gq

and pull ur lume outa the way or you WILL cut it more so the drivers side. Also it would be alot easier to drill a hole in the side of the inner guard to pull the lume back through before you weld the bases on. and remember most importantly dont F!@K it up hahahahahahahahahaha:blowup:

Hahaha ... wiring loom already done mate (this morning) and somethings bound to f:ck up, but I'll be sure not to post those moments!!! lmfao!!!

Show 40 post(s) from this thread on one page