I got an ark-pak today :)
Printable View
I got an ark-pak today :)
Yes my bad!!Quote:
Originally Posted by taslucas
Heaps more ground clearance now, because I took the side steps off, after a finding that they scrape and bend really easily. Now to save up for the rocksliders, after I pay for the gearbox and clutch change out; then the At tyres 2 inch lift, rear bar ...
Yeah buddy. Thats list never gets any smaller lolQuote:
Originally Posted by mudnut
Sent from my GT-I9305T using Motorculture mobile app
bought a new steering box haven't fitted it yet but will do soon hahaha
:Yahoo!:Picked it up from panel shop with a bit of work done to the front end looks 100%
Fitted a new double din head unit today plus a front mounted camera for those times when I need it for some tricky descents...
I'm picking mine up this weekend. Ill throw them up here.Quote:
Originally Posted by mudnut
Sent from my iPhone using Motorculture mobile app
I just did this too. Have always been worried about something happening of road and not being covered.Quote:
Originally Posted by Rustyboner81
Hopefully they come back with a decent price
X3........... was gonna have a look at TCIS but got bored filling out the details on their website lolQuote:
Originally Posted by Shaun 4x4
Got a tax return of $1100. Not huge as its first year of business and you can't claim first year losses. But that's still $1g to get the patrol finished.
That's the injectors and sound deadening covered now. Keeps the wife happy
Finally had the suspension fitted today. 2" lift, steering damper, etc.. Different car to drive, handles much better. Didn't have a chance to get the roof rack done. Roof racks and some rubber next week since now I can fit the tyres under there.
http://imageshack.us/a/img7/3944/e0ob.jpg
http://imageshack.us/a/img607/3042/wduw.jpg
Installed my turbo timer
http://i1222.photobucket.com/albums/...809_131756.jpg
I have also install and wired up my boost and egt gauge with amp read out.
Also installed my twin volt gauge with another amp read out.
Just got to finish connect up the engine bay side of things tomorrow
Got my car serviced by Detrac Diesel at St Marys, seem like good blokes that know what they are doing.
Thanks Pearcey for the suggestion.
Also put on a set of TDs recovery points on.
Hodge, anychance you can take a pic for us of how your dampner sits in both brackets at all? Just replaced the drag link on mine and 1 end of the dampner looks a bit low and may need to be turned slightlyQuote:
Originally Posted by Hodge
Here you got mate, hope they help.Quote:
Originally Posted by oncedisturbed
http://www.nissanpatrol.com.au/forum...396#post408396
Fitted up the Kaymar bar with help from a mate....
Attachment 32740
Attachment 32741
Attachment 32742Attachment 32743
Tip tip tip......tap tap tap....
Nice work!Quote:
Originally Posted by Drewboyaus
good lookin bar
Nothing, but did pay it a visit at the smash repairers
8ltrs of paint stripper on roof and 4ltrs on bonnet
Attachment 32749 Attachment 32750 Attachment 32751
Attachment 32752 Attachment 32753 Attachment 32754
Attachment 32755 Attachment 32756 Attachment 32757
Attachment 32758
Only a small job but fitted a strut to the small rear door, works a treat.
self opening, lol
Thanks to some help from members on how to remove trim, it went quite well.
Just whacked 3 stickers on.
[IMG]http://i296.photobucket.com/albums/m...psf73909f2.jpg[/IMG]
[IMG]http://i296.photobucket.com/albums/m...psfc90cb7f.jpg[/IMG]
[IMG]http://i296.photobucket.com/albums/m...ps70bd553b.jpg[/IMG]
Got the trol fair bogged today
Sent from my iPhone using Motorculture mobile app
No PICS!!!????Quote:
Originally Posted by trekster
Got my cross country intercooler on. Have not put the scoop on or cut the hole in the bonnet so it has not made a difference yet
Got sick of Motorculture so gone back to Tappa
Looks great mate.Quote:
Originally Posted by Winnie
Oh so thats why you didnt go out on the trip today.................. looks bloody good though mateQuote:
Originally Posted by The Dogman
Mounted my reco'd winch in the bar. Still got to do the wiring.......
Tip tip tip......tap tap tap....
[QUOTE=trekster;408929]Got the trol fair bogged today
PICS! i always forget to get pics when the hearts racing, any more details though?
Got my pillar pod installed and my gauges.
Boost and egt is all set up.
Need some bits to finish of the dual volt and amps.
http://i1222.photobucket.com/albums/...811_165122.jpg
http://i1222.photobucket.com/albums/...811_165115.jpg
Great gauges. Can be completely dimmed down to nothing with the factory nissan dimmer.
Re-sealed the engine oil cooler. Absolute prick of a job and the weather turned to shit as I started. Windy and raining. :( but jobs done. Just to stop the 1 drip a day leak.
http://img.photobucket.com/albums/v9...301E24663B.jpg
http://img.photobucket.com/albums/v9...30161848FE.jpg
Threw a few explicit words at the car as it began to miss fire last night on the way to work and again this morning to the shops.
Checked the fuel filter, was cactus. Gooey glumps of ?the filter element come out of the filter
New fuel filter, gave the MAF a spray/clean and wow what a difference it made to the car !!
Rossco and I drove up to Benalla to pick up our sliders from DRC Fab.
Great bloke, very talented and bloody good quality.
Welds are spot on too, this bloke is very crafty!
I'll update and show pics when installed but I'm going to put some checkerplate on them first to stop sticks and branches from getting caught up.....Dazz's advice!!!
Pre fitment pics.Quote:
Originally Posted by AB
HURRY UP THEN, SLACKER! lmao
I left them in Rosscos shed....He's probably selling them on Ebay as we speak...lolQuote:
Originally Posted by MEGOMONSTER
Already sold. Lol.Quote:
Originally Posted by AB
Cleaned the crap out of the back so I could measure up for the back wall bracing for my chop.
Cheers
Just bought some really cheap rocksliders on eBay from a bloke in Christmas Hills. Awesome!