Just had a tidy up loose ends day today, got yesterdays booboo soughted, lined up the bonet fixed bonet catch, fixed kockeyed drivers side door, did a final sand and paint on some bog in the door and a little pinstripe removal
Printable View
Just had a tidy up loose ends day today, got yesterdays booboo soughted, lined up the bonet fixed bonet catch, fixed kockeyed drivers side door, did a final sand and paint on some bog in the door and a little pinstripe removal
Foters??? :-) ehhehehehe
piccies of drivers door, decided to just respray the whole door since alot of paint came off with the pinstripes, not 100% happy with the result but since one day she will get a whole respray (and maybe a few new doors... one day :rolleyes: ) I will live with it for now lol
yep xmas time i reckon comming along nicelyQuote:
Originally Posted by Michelle
--------------------------------------------------------------------------------
Got brave and started to cut a hole in the floor but then Bam! The little grinda shat its self so this is all i got done
Bumma down to the hardware tomorrow ay ;-)
Michelle,
I have read the entire thread and am very very impressed with the way you have tackled everything on the jeep with enthusiasm and gusto. I have some rust on my GQ and I have been scratching my head thinking about starting but after reading the thread, I am ready to roll my sleeves up and get cutting this weekend.... Thanks Michelle.. Good luck with the Smurf, I'll be watching with interest..
Stephen.
Got the hubby to take a look at a few wireing probs today, fixed the horn, and found out I need replacement front indercators, (ebay) flasher cans and i need to replace washer bottle and pump hope to rob those of my parts car, we also need to find a fault i the rear pas side wireing somewere as the new tail lights dont work
very impressive progress!
Just finishing off some smaller jobs
Coming along very nicely indeed, well done
when i got mine registered they are legal to seat 4 in qld so the rear seat can be used with the booster seats with no problems they come with factory fitted seatbelts in the seat and aftermarket retractable arent hard to install, good luck with it
well things have slowed dowen due to the $$ issue and the fact that I need to make a trip to Bendigo to get some parts of the parts truck but hopfully over the next few weeks i'll get moving again :)
lol mate we all get that problem ,right now im saving for new tyresQuote:
Originally Posted by michelle
mmmm, just got to pay for my rebuilt engine before I can even think about new tyres. Doin' the rest of it myself too, great to see another chick with a grinder, did you get it going or buy a new one.Quote:
Originally Posted by roofy
Your lookin' good Michelle.
Cheers from Louise
Lol @ louise, nah pinched the hubbys 5 inch but then had to go get new wire brush, flap wheel and cutting disks as the 4 inch ones did'nt fit :p haha funfun
Ouch, I bet your hubby jumped when ya pinched him on the 5 inch!!! LmaoQuote:
Originally Posted by Michelle
Always good reading your thread Michelle:-)
Lucas
you quick lucas haha good one buddyQuote:
Originally Posted by taslucas
Hahaha was wondering how long it would take to bite on that one ;pQuote:
Originally Posted by taslucas
Well I better do an update, Got the replacement washer bottle and pump fitted works :D got new front indercaters of ebay fitted and working, fitted all new 24 volt globes all round, and been climbing around under neath getting rid of caked on mud and grease ect, and painting with chassy black as I go dirty job that one
__________________
hey michelle, its been a while since ive seen ya post in here and i was wondering how your resto was going? i hope all is going well mate!
yep im still about, just been on holidays ad my puter has died but still plodding along ill see if i can upload a few pics from my phone
think i worked out how tk post piccies from my phone :) not 100% happh with pait job but maybe im getting to fussy
and the dints well ive pushed em out afew times but they just pop back in lol
That's lookn real good Michelle and the little fella looks stoked as well
Tappin N Crappin
its looking nice mate! shes come along way from what shes started as!!!
what a difference a bit of tender care can do
well done michelle keep up the good work
spent the morning trying to get the bolts out to remove canopy but those little buggers are a pain in the butt to get out!! got 4 out of the 18 :( and stuffed a few too
Had a go at getting those canopy screws out yesterday, yeah got 4 out!! Blood pain in thde bum to get loose, any one changed the screws for bolts? Has to be a better option there? Any way, shagged out a few screw heads and one of the nuts must have let go cos all it does is spin before I buggerd my T30 tool Grrr :mad:
So got my puter up and running again :D yay! for now lol any way here are som up dated piccies:
hmmm some were along the line I have lost the abilaty to resize my pics before up loading via right clicking on them can any one help pls ??
If you select to many pics at once it wont let you do it. Or does it only do it when selecting one photo?
yeah nothing happens when I press upload with just one either :( have done it before dont know what im doing rong lol
Hey michelle ya can either go and download photosizer and that lets ya change the size to whatever ya want or open a photo bucket account which is free download your pics there whatever size doesnt matter and then copy the url to your post and that gives big pics like this
http://i1189.photobucket.com/albums/...haFlexinit.jpg
Im only gunna use photobucket now because you dont need to change anything at all. Once you upload your pics there (and they have a bulk upload option as well so you can do 100's at once if ya want) just hover over the photo and a box drops down left click on img code and it says copied then right click in your post click paste then a code comes uo click post reply and wallah you got BIG pics no mess no fuss
Thanks think I had the photosizer last time might give both a go Cheers :)
Old MK is looking good Michelle. Last canopy I took off, bolts come out relatively easy, some resistance, but ok.
Tim
yeah ill keep plodding at it but I gotta go get a new tool since i stuffed it lol, hope i done keep stuffing them since supercrap only sells them i sets lol ill end up with a crap load of them tools and no T30's lol
Go to Autobarn and buy a T30 socket type single made by Kinchrome. You'll pay about $13-$18 for it, but will last whole job.Quote:
Originally Posted by Michelle
Tim