You getting the62 number plate on it 😜Quote:
Originally Posted by MudRunnerTD
Printable View
You getting the62 number plate on it 😜Quote:
Originally Posted by MudRunnerTD
Brace yourself!!! #The62 is gunna Rock!!! Dripping in Goodness!!
http://www.nissanpatrol.com.au/forum.../2022/01/4.jpg
Sent from my SM-G977B using Tapatalk
Well? We are waiting?Quote:
Originally Posted by MudRunnerTD
I would chew my own arm off before I put a Kings Logo on The62. I would punch myself in the face and then headbutt the ground... lol. Might have grabbed a couple of LED flexible strip lights with dimmers though. No Kings tag for the win.Quote:
Originally Posted by mudski
To be honest I did think it was a bit strange seeing a pic of you there. Thought you would have bought a Kings Hi lift atleast! Haha!Quote:
Originally Posted by MudRunnerTD
OK shit got Real Again!!!! These things! Seriously. Everything is PULL LIKE FARK and pop the clips. Everything is clipped in.
I have a Factory Nissan trailer plug loom to fit and while I'm there will fit the KO Gear rear locker override switch making the rear factory Locker closer to an E Locker in function.
I will do a separate thread for the plug and play loom install too.
http://www.nissanpatrol.com.au/forum...2022/01/15.jpg
http://www.nissanpatrol.com.au/forum...2022/01/16.jpg
http://www.nissanpatrol.com.au/forum...2022/01/17.jpg
http://www.nissanpatrol.com.au/forum...2022/01/18.jpg
http://www.nissanpatrol.com.au/forum...2022/01/19.jpg
http://www.nissanpatrol.com.au/forum...2022/01/20.jpg
In this photo you xan see that factory Sub Woofer. Much smaller than I expected. This is the location that guys are fitting a double ARB compressor in the Ti option.
http://www.nissanpatrol.com.au/forum...2022/01/21.jpg
http://www.nissanpatrol.com.au/forum...2022/01/22.jpg
http://www.nissanpatrol.com.au/forum...2022/01/23.jpg
The factory loom had a plug waiting for thr loom to plug into which is very bloody handy.
The Loom though was EXACTLY the right length.... another 150mm would have been nice damn it! It wasn't Free!
http://www.nissanpatrol.com.au/forum...2022/01/24.jpg
It has a new grommet incorporated so pull and and put through. Winner.
http://www.nissanpatrol.com.au/forum...2022/01/25.jpg
http://www.nissanpatrol.com.au/forum...2022/01/26.jpg
So here is the internal Trim panel I had to pull out!
http://www.nissanpatrol.com.au/forum...2022/01/27.jpg
The factory Sound deadening is pretty cool. Like wrapping it in a quilt!
http://www.nissanpatrol.com.au/forum...2022/01/28.jpg
http://www.nissanpatrol.com.au/forum...2022/01/29.jpg
So while it's off the KO Kit goes in too.
http://www.nissanpatrol.com.au/forum...2022/01/30.jpg
http://www.nissanpatrol.com.au/forum...2022/01/31.jpg
http://www.nissanpatrol.com.au/forum...2022/01/32.jpg
http://www.nissanpatrol.com.au/forum...2022/01/33.jpg
Selectable switch hidden behind the rear vent. It's a set and forget but if you had to turn it off then a screw driver through the vent to flick it off.
http://www.nissanpatrol.com.au/forum...2022/01/34.jpg
http://www.nissanpatrol.com.au/forum...2022/01/35.jpg
http://www.nissanpatrol.com.au/forum...2022/01/36.jpg
http://www.nissanpatrol.com.au/forum...2022/01/37.jpg
http://www.nissanpatrol.com.au/forum...2022/01/38.jpg
And this is how I packed up last night..
http://www.nissanpatrol.com.au/forum...2022/01/39.jpg
Here are a couple of shots of the clips used to hold the panels on. They are identical to the clips holding on the door trims on a GQ...
http://www.nissanpatrol.com.au/forum...2022/01/40.jpg
http://www.nissanpatrol.com.au/forum...2022/01/41.jpg
Then the instructions again. The pieces MUST be put back together IN ORDER. Take note. I fitted, removed, refitted, removed, item 4 3 times....lol.
Read the bloody instructions damn it!
http://www.nissanpatrol.com.au/forum...2022/01/42.jpg
http://www.nissanpatrol.com.au/forum...2022/01/43.jpg
Sent from my SM-G977B using Tapatalk
Interesting! How does each of those selectable options behave?
And why not have the switch in easy reach of the driver, Darren?
I haven't really played with the 4wd Selectables yet but from what I understand they change the torque delivery. There is some better info in the manual that I have not really studied yet.Quote:
Originally Posted by BrazilianY60
So this override switch is linked into the factory loom. It changes the function of the switch in the centre console area to select the diff lock. The switch at the rear is purely to switch between the factory Loom and the override loom. For the most part I will never need to turn it off again. If ever I do I can.Quote:
Originally Posted by mudnut
The difflock switch now functions on the same basic principle as an E Locker. On/Off.
Awesome, but it's not white. LOL
So things are piling up and I'm getting ready to start the rear fitout.
2 x 100AH Lithium -Check
RedArc Manager 30 - Check
RedArc Red Vision- Check
3000W pure Sine way Renology inverter- Check
250Amp isolator - Check
ARB Double pumper compressor - Check
Induction Cooker - Check
Bushman 85lt Upright fridge- Check
Plans for a water tank and running water - Check
There might even be The Kitchen Sink going in. That is rattling around in my head at the moment and I nearly have that solved.
I picked up a Bushman 85lt upright on FB Marketplace today with a full Shroud box which is a real winner and got it at about half price to buy it retail so a real win
http://www.nissanpatrol.com.au/forum...022/04/115.jpg
http://www.nissanpatrol.com.au/forum...022/04/116.jpg
http://www.nissanpatrol.com.au/forum...022/04/117.jpg
http://www.nissanpatrol.com.au/forum...022/04/118.jpg
Wife made an Upright fridge a Not Negotiable!!
http://www.nissanpatrol.com.au/forum...022/04/119.jpg
http://www.nissanpatrol.com.au/forum...022/04/120.jpg
http://www.nissanpatrol.com.au/forum...022/04/121.jpg
http://www.nissanpatrol.com.au/forum...022/04/122.jpg
http://www.nissanpatrol.com.au/forum...022/04/123.jpg
http://www.nissanpatrol.com.au/forum...022/04/124.jpg
http://www.nissanpatrol.com.au/forum...022/04/125.jpg
Here is the Manager 30 and Red Link system installed on thr Redarc car and stand at the show last week. Was great to chat with the guy working through my questions in the planning. Inhave had the kit for a month or so.
http://www.nissanpatrol.com.au/forum...022/04/126.jpg
http://www.nissanpatrol.com.au/forum...022/04/127.jpg
Sent from my SM-G977B using Tapatalk
Boy, that electrical layout makes me weep. Very noice!!!
So you went the Bushman upright. After that Bushman v Kings comparo you put up I'm very surprised. Just couldn't bring yourself to buy Kings mate?
I searched everywhere for a Kings mate. I 100% was buying the Kings and then cover the front in a contact. Kings have removed it from the market completely and all online links are broken. 8 went into a store ans they advised that they had a new one coming from a different supplier which told me they got done for breach of copywright or patent or something and had to back track.Quote:
Originally Posted by Plasnart
I stumbled on this one for basically thrbsame price as Kings were selling theirs for and included the $500 shroud. This is a win. I saved about $1000.
Kings lover. :DQuote:
Originally Posted by MudRunnerTD
Bhahahahaha. I reckon I dodged a Bullet!! The Shit I'd have copped for a Kings logo would not have been worth it. I was going to cover the door in contact but was confident you lot would remind me often. LolQuote:
Originally Posted by Plasnart
Reading through three eyeballs Dazman, have you seriously gone electrical cooktops?
Sent from my iPhone using Tapatalk
I might have..... don't hate me brother!Quote:
Originally Posted by MB
Never would or could Brother [emoji106][emoji106]
Sent from my iPhone using Tapatalk
Hmm someone’s gonna be busy!!Quote:
Originally Posted by MudRunnerTD
Sent from my iPhone using Tapatalk
Can only possibly go two positive ways [emoji123][emoji123]:
#1 (Y62) We’re three days in crossing, can I please chill a tin in your Upright, apologies Bloke, Kale is vegie keeper full [emoji2961]
#2 (Y60-61) Fark me, outa LPG cooker fuel, can we please cook a snag on your convection [emoji23]
Sent from my iPhone using Tapatalk
Well been a bit quiet and got a bit done. The electrical fitout has gone on the back burner and won't be ready for Christmas damn it but I'll survive.
Did a Mountain of research of an Awning. 270 and 180 degree were considered.
I wanted a No Pole design and there are a few in the market now. I have been to a few shows specifically to look at awnings. There is a fair bit of money in it and h7ge price variants between the bottom and top of the market. Sifting through options and figuring out China versus the rest of the world. This is thr biggest leap.
So No Poles.
Heavy Duty trusses (This is Clearly the most important part) and boy is there some differences. This was actually the most important part of my decision.
HD Ripstop Canvas.
Quality Bag.
I found the clear winner about 12 months ago and spent the last year looking for anything that could compare.... and nothing came close. Seriously.
So I have bought a Bush Company 180Max Aweninh out of South Africa. And damn! It's nice. A bit of coin but I truly expect to get 20 years out of it. The pain of the purchase will be long forgotten. Lol.
http://www.nissanpatrol.com.au/forum...2022/12/19.jpg
http://www.nissanpatrol.com.au/forum...2022/12/20.jpg
http://www.nissanpatrol.com.au/forum...2022/12/21.jpg
http://www.nissanpatrol.com.au/forum...2022/12/22.jpg
http://www.nissanpatrol.com.au/forum...2022/12/23.jpg
http://www.nissanpatrol.com.au/forum...2022/12/24.jpg
http://www.nissanpatrol.com.au/forum...2022/12/25.jpg
http://www.nissanpatrol.com.au/forum...2022/12/26.jpg
http://www.nissanpatrol.com.au/forum...2022/12/27.jpg
First set up took 2 minutes.
Stoked.
Sent from my SM-G977B using Tapatalk
@MudRunnerTD what's been happening?12 months and no update? Has the electrical gone in?
Sent from my SM-S916B using Tapatalk