I haven't even run a drain tube and bottle for mine yet. Still dry as goats inside it after a month.
Printable View
I haven't even run a drain tube and bottle for mine yet. Still dry as goats inside it after a month.
Thats for the 2.8 litre engine that mod .Quote:
Originally Posted by adventurepaul
Hi "The Ferret"
So I looked for MAF, and it appears there are two sensors, one in the intake pipe after the air cleaner, and the second directly in front of the intercooler, It seems the first one is not relevant to NADS, so am I looking to understand if I have this correct.
There is definite evidence of oil from the crank case vent, so the Provent (or similar) seems the answer here.
What is a safe solvent to clean MAF?
Super Cheap sell MAF cleaner , i got mine from JAYCAR called electronic component cleaner , make sure dry before you re install it
Dr Garry, the one near the airbox is your MAF, to clean it, use Maf sensor cleaner, spray it on over a white rag so you can see when it's clean.
Do not touch any part of the metal components with your fingers, don't even wipe it with the rag.
Yes, the Provent is the best, not the cheapest but very good.
It would also pay to remove the intercooler and give that a good clean out as well as the intake manifold.
There are other solvents to clean these, petrol is one, but you must remove all traces of petrol by washing before starting the motor.
Cheers, the ferret.