Bacho's GU6

Installed a couple LED strips around the barn doors that's triggered by a rocker switch on the inside rear panel. Punches out an Amazing amount of light!!

Attachment 63787

http://www.nissanpatrol.com.au/forum...2016/01/75.jpg

http://www.nissanpatrol.com.au/forum...2016/01/76.jpg

http://www.nissanpatrol.com.au/forum...2016/01/77.jpg

http://www.nissanpatrol.com.au/forum...2016/01/78.jpg





Sent from my iPhone using Tapatalk

Hooked up the rear 20w LED work light on one of ferrets brackets. It's powered up by via the rear fuse box with a relay for good measure and then switched on up the front via an ON-OFF-ON switch.

The light works manually, but I'm still having some problems picking up the trigger from reverse to switch the light on automatically - problem for another day!!

http://www.nissanpatrol.com.au/forum...2016/01/79.jpg

http://www.nissanpatrol.com.au/forum...2016/01/80.jpg



Sent from my iPhone using Tapatalk

One of my favorite mods that...

Sent from my SM-P600 using Tapatalk

Nice work on the lights.
Where did you send the wire through at the back for the spare wheel light ??

Also if your relay is somewhere close at the back you could pick up reverse trigger from the wired up rev. light maybe .

Quote:

---

Originally Posted by Hodge

Nice work on the lights.
Where did you send the wire through at the back for the spare wheel light ??

Also if your relay is somewhere close at the back you could pick up reverse trigger from the wired up rev. light maybe .

---

Thanks mate.

After some deliberation and research, I drilled a hole on the back of the door (just under the light bracket), painted it up and but a rubber gland over it before shoving the wire through.

It appeared to be the way that most people did it on later model GU's. How have you connected your work light up?

Yeh relay is up the back next to the fuse box.

http://www.nissanpatrol.com.au/forum...2016/01/81.jpg


Based on my limited understanding of auto elec work, I was under the impression that the switch needed the reverse trigger and not the relay. I.e. If the switch was turned 'on' manually or triggered by reverse it would power of the relay and conversely the light...

Happy to be corrected though?

Sent from my iPad using Tapatalk

Something like this - pretty sure I copied this diagram from someone on NP a while back

http://www.nissanpatrol.com.au/forum...2016/01/82.jpg


Sent from my iPad using Tapatalk

You just need to run another cable from the reverse light (or reverse switch on the gearbox) to the switch.

Quote:

---

Originally Posted by Bacho86

Something like this - pretty sure I copied this diagram from someone on NP a while back

Sent from my iPad using Tapatalk

---

This is the one I drew up and posted it here a while ago. Utilizing 2 way switch.

http://www.nissanpatrol.com.au/forum...id=63714&stc=1

Quote:

---

Originally Posted by Hodge

This is the one I drew up and posted it here a while ago. Utilizing 2 way switch.

http://www.nissanpatrol.com.au/forum...id=63714&stc=1

---

thats how mine is wired up too.

Few photos taken from long weekend spent around Mansfield and Alpine National Park, camped along King River

http://www.nissanpatrol.com.au/forum...016/01/285.jpg

http://www.nissanpatrol.com.au/forum...016/01/286.jpg


Lake cobbler

http://www.nissanpatrol.com.au/forum...016/01/287.jpg

Dandongadale falls and rock outcrop

http://www.nissanpatrol.com.au/forum...016/01/288.jpg

http://www.nissanpatrol.com.au/forum...016/01/289.jpg


Sent from my iPhone using Tapatalk