Bloodyaussie's GQ

Quote:

---

Originally Posted by Bloodyaussie

I've got a Locker to ya penis heads!!!!!!!

I am really gob smacked but Harry must have put the screws in to get my head done so quickly as I just got back from the workshop and George and Billy were torquing down the head... they think it may be running tomorrow?

I feel special!!!!

---

Yeah my old boy can be pretty persuasive when he wants, plus it helps using the same bloke for 20 years XD

More shiny bits :)
Bottom end looks good and no excessive movement Attachment 41234
Re surfaced lifters/ push rod buckets or whatever you like to call them and you can see i polished the block clean from any contaminates
Attachment 41231
Push rods cleaned and inspected for straightness and stress fracturesAttachment 41232Attachment 41233
Welded up the expansion plugs in the head coz 1 was cracked, straightened, valves re seated and given a light skimmed for a nice clean and polished mating surface Attachment 41235Attachment 41236Attachment 41237Attachment 41238
torqued down,valve clearances set, lubed and ready to go home :) Attachment 41239Attachment 41240

Quote:

---

Originally Posted by Alitis007

I rekon theres some back pedaling happening now with mates rates and love jobs getting thrown in there lol

---

Ha, ha....

In all seriousness, I am impressed by the speed and progress.

I should expect it though, as I am a Sparkie who likes to do all the jobs but even though i am really handy, i am no Chippie and when I do a job that takes me all day, my Chippie mate would do it in 3 hours.

Quote:

---

Originally Posted by happygtu

Ha, ha....

In all seriousness, I am impressed by the speed and progress.

I should expect it though, as I am a Sparkie who likes to do all the jobs but even though i am really handy, i am no Chippie and when I do a job that takes me all day, my Chippie mate would do it in 3 hours.

---

Thanks mate, dads been in the game for over 35 years so the people we use know the quality he demands with time always a factor, sometimes we can get certain jobs fast tracked but this job would normally have a 7 day turn around time anyway even when we are flat out. Also having the right tools and equipment at your disposal makes it alot easier lol

Quote:

---

Originally Posted by Alitis007

More shiny bits :)
Bottom end looks good and no excessive movement Attachment 41234
Re surfaced lifters/ push rod buckets or whatever you like to call them and you can see i polished the block clean from any contaminates
Attachment 41231
Push rods cleaned and inspected for straightness and stress fracturesAttachment 41232Attachment 41233
Welded up the expansion plugs in the head coz 1 was cracked, straightened, valves re seated and given a light skimmed for a nice clean and polished mating surface Attachment 41235Attachment 41236Attachment 41237Attachment 41238
torqued down,valve clearances set, lubed and ready to go home :) Attachment 41239Attachment 41240

---

Bloody amazing job there George!
Do you expect it to be making a bit more power with all the rehab work?

Got to keep my mind busy this morning. ..

Was hoing to work then mags said she is seeing her aunty and I need to watch the kids... bloody hell!!

Attachment 41250Attachment 41251

Quote:

---

Originally Posted by Drewboyaus

Bloody amazing job there George!
Do you expect it to be making a bit more power with all the rehab work?

---

Thanks Drew, it should have more torque and Jonathan should notice the deference while towing.

Quote:

---

Originally Posted by Bloodyaussie

Got to keep my mind busy this morning. ..

Was hoing to work then mags said she is seeing her aunty and I need to watch the kids... bloody hell!!

Attachment 41250Attachment 41251

---

Why did you put the pic from last week while i was tuning the other motor for ?? Lol

You guys are absolutely amazing. Top job and top quality, well done to all. I am sure it is a huge relief for you Jonathan.


Sent from my iPhone using Motorculture mobile app

Work faster George!! Fair dinkum mate your dragging ya bloody arse around this thing!! Get on with it already!!!





:D. Love ya work mate