Nah mate and thanks for that
Printable View
Nah mate and thanks for that
hey after the bit that houses a cd player and clock mines stuffed and has holes in the top not sure if these holes are standard if they are its fine but id prefer one that hasnt
cheers adam
Looking for a GQ 4.2 Turbo diesel in WA. Under 300k on the clock.
All ears and patience...
I've got the old petrol one, from under the drivers side of my wagon, it should still fit. Its 68L and comes with all the pipe work, you'll need to buy some new bolts for it though. $250
Hey guys,
Just need 1, 15inch sunraiser to suit the the wagon (y60) It needs roadworthy tread on it as its only gunna be a spare. (have been looking for one for 3 months now (and its holding up rego!!)
call/txt Kelly 0425 180 044. Or message me on here. Prefer Gold Coast area. Pay up to $60 for something with legal tread. Thx
Can't you borrow one, down here in Mexico if you have spare must be RW. If no spare no problem, only yours if you get a flat,
I believe the laws regarding spare wheel in QLD have changed.
You no longer require a spare but if you do have one the tyre must be roadworthy.
It may pay to call the place that is doing the inspection and check with them.
I have heard you don't need one, but I have the patrol for towing a float, and it's not fun getting stuck with horses on a float and a flat Tyre.also usually have bubs with me and kids and flats not fun either
have got one i think , came in a box full of GQ bits so im assuming its for similar
all parts sourced now except for glove box lock/latch thanks rich
Iv got the glove box lock. It's black but I don't have the key. Pm me for price and postage.
Iv got the glove box lock. It's black but I don't have the key. Pm me for price and postage.
Hopefully he found 1 in the last year hahahahahahhaahhaaQuote:
Originally Posted by mudmav
What colour
Does anyone have a clean (ie. not welded) engine pipe for a non-turbo TD42. The one that runs from the manifold to the start of the exhaust. I thought with all the extractors and turbo conversions that these must be everywhere but I can't seem to find one. I'm in Victoria. I guess shipping will be hefty for something like this. Thanks.
If u can't find me then get your local exhaust shop to fan one up. Can't see it taking too long or costing too much. As reference my local place built me a custom 3" mandrel dump pipe for $220.
[Tapatalk2 on Nexus7]
looking for unwanted trailer lights if you have any let me know...........................
What do you need?
Tim
Changed your thread title to trailer lights, hope that's what it was meant 2 be
You can get cheap generic type lights from plenty of places (around $15 a side). Supercheap, bursons, etc... is this what your after?
Ok I take it you are after the "hood" part? The plastic cover part? Blue or Brown?Quote:
Originally Posted by silly one
Tim
I am after a dissy for my 1988 RB30S carby fed Patrol. It has the Vacuum advance on it.
Anyone done an EFI conversion on theirs and have a spare one? I have found plenty for the TB42 but not mine. Thanks.
cheers guys,,
just thought i would try on here to see if any one had some they didnt want, before i went and spent money i know that sounds tight but you dont get if you dont ask.
I have found an auto parts place and he is a local small buisness, which i like to support so if i dont get any joy from here I will be heading his way.........
tim
cheers man.Quote:
Originally Posted by NissanGQ4.2
WANTED
Item Description:Arb air compressor with wiring and switch Designed for Air Locker use and inflating tyres plus other equipment
Condition: used
Price: any under $180
Extra Information: cash sitting here waiting
Your Location: Hobart
Contact: please PM me, will pay for postage at right price
Autobarn in Cranbourne had 2 different types when I looked last week. About $40 from memory...?
Wanted : does anyone know of a GU 1999 tray all coil chasis for sale no diffs or other parts as the young fella has cracked his or if its fixable . The crack is on both sides on the bottom second tray tower from the back of the cab which Ive been told could have been due to the vehicle being a teltra unit with full canopey in a past life.
We're in Mackay so the closer the better but will consider all offers thanks dad
They can be repaired, they beef them up before they crack and repair the cracked ones. Don't know where up your way. Maybe 4x4 shop that does custom work
hey all looking for a rolling coil spring chassis for a custom body swap dnt realy care what model as long as its coil sprung would like as much on it as possible for the lowest price haha would like a swb if possible but anything will do really
hey all looking for a rolling coil spring chassis for a custom body swap dnt realy care what model as long as its coil sprung would like as much on it as possible for the lowest price haha would like a swb if possible but anything will do really
Their has been one on ebay for a while rolling chassis with diffs fuel tanks etc for $650
How come 5 threads on the same subject, seems stupid
Moved it here for you mate, please only start one thread in one section not 4 in different sections, thanks
Thanks Dogman was getting confused...........again
yeah sorry just wanted to grab every ones attention
sorry
No worries its all good, I deleted 3 of your threads so you should get heaps of attention now mate...lolQuote:
Originally Posted by silly one
was about to start giving bad attention for all the posts the dogman always on patrol haha get it what a joke haha and I'm not even a dad yet nice
Like it Macca..........The Dogman always on PATROL, may have to borrow that for my signature mate..hahaQuote:
Originally Posted by macca86
brown preferably but blue will do
Youd be chasin the MK style ,thats the one with the clock , MQ dont have clock