Bender right ???Quote:
Originally Posted by Clunk
Printable View
Bender right ???Quote:
Originally Posted by Clunk
Lol. Yea..
Side steps here we come
Sent from my SM-G800Y using Tapatalk
120w solar panel for the roof rack.
33" 330w light bar
A Patrol!
Attachment 61350
VE Pump Timing Tool... getting close now
http://i1083.photobucket.com/albums/...psfx8ewfny.png
Been buying grab kits of different bits and pieces lately
one just arrived today and its full of internal and external circlips
of different sizes , you just never know , these suckers fly off if not
put on with the correct tool lol
Terrain Tamer TGS series shocks
Let me know how you go with them? Thinking they might be the replacements for my OME shocksQuote:
Originally Posted by Clunk
Shes been a busy few weeks! 2" lift kit, proper reducers for catch can, CFX-40 Fridge, Dual battery tray & currently buying shed loads of cabling for dual battery system. Made a rear shelf to sit where rear seats go & plastic tubs for under. 2nd Hand A/C compressor mainly for pulley & clutch plate & another 2 A/C bearings.
caster correction bushes and panhard bushes ... all mr nissan's. my pocket aches a little
A 10W solar panel & regulator to keep my camper trailer battery charged while not being used.
Bazza
Attachment 61410
Got a set of these bad boys from three dogs.
Just to figure out fitting now.
Sent from my SM-T705Y using Tapatalk
Check rusty's pics on my thread , pretty straight forward imo
New fuel filter.. Guessing i better change it since i have not changed it since i got the car.. So who knows how old it is. Now to give myself a crash course on changing it.
Just learnt the hard way... once you undo the sensor on the bottom diesel pisses out EVERYWHERE god dammit!
Glad i had the assembly out of the car... so it's just all over the carport floor now lol
haha your lucky it wasnt petrol mate, some of the efi models really build up some pressure and you would be wearing it haha. howd you go with the rest of it? hows it running now?Quote:
Originally Posted by Softy
Got new shoes.
http://www.nissanpatrol.com.au/forum...015/09/247.jpg
Weren't yours not that old?
nice mick! looking good! im surprised you can get that low to the ground!!Quote:
Originally Posted by MEGOMONSTER
Has a little bit more go now.. I changed more for piece of mind as i have no idea how old it was... It didn't look to bad inside anyway so it would have been ok for a while yet.Quote:
Originally Posted by rusty_nail
Apart from pissing diesel everywhere the rest of it went smoothly lol
Was thinking the same thing, maybe Mick traded in with 50% tread so not as much for new onesQuote:
Originally Posted by Winnie
Spare was still newQuote:
Originally Posted by threedogs
Went to get a slow leak looked at but the tyre fitter ducked the bead so scored a new tyre.
Bought two new ones $300 a corner.
Happy days.
Replied above or below. LolQuote:
Originally Posted by Winnie
6 new rocker switches ..... Should have em by Tuesday.
One of these
http://i1083.photobucket.com/albums/...s6lu9ppty.jpeg
and one of these
http://i1083.photobucket.com/albums/...sdfouayac.jpeg
Should sit on the roof of the Patrol nicely and give us something to do during the caravan adventures.
Also went and visited Supercrap today while they were having they're sale and picked up the following bits
COB LED work light for $29 (Half price) - Super bright
http://www.nissanpatrol.com.au/forum...015/09/284.jpg
2,000kg bottle jack for $15 (about $25 off) - Can't argue with that
http://www.nissanpatrol.com.au/forum...015/09/285.jpg
A set of Stanley feeler gauge. Now to check the tappet clearances.
http://www.nissanpatrol.com.au/forum...015/09/286.jpg
Plus a few other bits and bots along the way
Sent from my iPad using Tapatalk
NOT......
Rang repco for a price on a starter motor $343.
I'll wait till tomorrow and drive 15 minutes up the road a pay $135 with a 3 year warranty.
Gotta love eBay.
OzTent RV5 so the missus doesn't have to deal with the copious amount of room in the double swag.
Brought the boost sensor adaptor on ebay, it sits under the OE boost sensor
comes with extra bolts and sleeves to space the engine cover up a tad.
I dont run an engine cover.
also comes with an "O" ring to allow accurate readings.
Cost me $50 but much better than the system I have now.
Highly recommend if you want a foolproof way to get boost readings.
Just waiting on another 1/8th brass plug to arrive and I'll re-do the dawes and boost gauge
http://www.ebay.com.au/itm/Nissan-Pa...item3d00062dd3
buy 2 for that price . Is the old one U/S or not worth fixing at those pricesQuote:
Originally Posted by jay see
Is it a high torque style starter
Been raving about those cob lights for a while now , awesome output imoQuote:
Originally Posted by Rocket55
My filters arrived. Now just to pick up the Delo 400 tomorrow.
http://www.nissanpatrol.com.au/forum...id=61475&stc=1
Don't know. Just wanted one that would start. The one I got was out of comet in SunshineQuote:
Originally Posted by threedogs
You planning another trip to the high country hodge, or do you just like keeping the maps out?? :)Quote:
Originally Posted by Hodge
Sent from my iPhone using Tapatalk
Haha more like, I look at those maps and dream of one day actually visiting those spots and using them lol.Quote:
Originally Posted by Bacho86
Haha all in good time! Was talking to my dad and brother over the weekend about doing deddick trail over cup weekend - have you done this before or heard much about it?Quote:
Originally Posted by Hodge
Sent from my iPhone using Tapatalk
My work mate was telling me about it . There is apparently a section they call the stairwell ???? Steepest bit of high country he's ever seen and hes been all over.Quote:
Originally Posted by Bacho86
Sent from my SM-G920I using Tapatalk
Yeh it's meant to be pretty impressive I've heard as well, my Dad did it a couple years ago and he's happy to do another trip there, so may do that on Cup weekend. Its a bit further away than a standard Licola / Woods Point HC trip, so the extra day off for the long weekend will help. Not sure if ppl here will still be interested in going that far away though...Quote:
Originally Posted by Hodge
4 bolts - m10 1.25 thread 110mm long
Brown Davis long range fuel tank ....... install on the 12th of Oct