Limmy that metal pipe is the first pipe that comes out of your turbo by the looks of it. The rear pipe I supposed you'd say. Or is it the other front pipe...
Printable View
Just as cheap to buy one really.. ill put a link up where I got the slides, they do a nice complete unit to, to suit all sized fridges.. around $250 for the 50L size..
Kallen Westbrook
Owner of
Westy's Accessories
14 minutes to slow mate ;)
Don't slap it, tap it!!!!
Here it is. Top guys to deal with..
http://www.ebay.com.au/itm/DRAWER-SL...-/121001660932
Kallen Westbrook
Owner of
Westy's Accessories
Refitted the light bar to underneath the front of the roof rack. Had to lift the rack to fit it under. Also changed the fuel filter and made a little thingo for the glove box.
Photo of light bar?
If you're happy and you know it tap a post!
I forgot! My noo refurbed GU6 leather fitted in my GU2!!!:bananarock:
I blew the cobwebs out of the old girl on a 550 km road trip in, did all that for a 45 minute meeting.
[QUOTE=thebeatjackson;191022]Replaced all the door trims, fixed the power windows and mirrors, fixed the horn and windscreen washers, removed the old wheel flares to make way for new flexy flares, removed the roof basket so I can fit it into my mates garage for a service, fit blue LED dash backlights. Good day![/QUOTE
Hi beatjacko...how did it go with the led globes in the dash ?...I bought some from ebay and put the old ones back in because they couldnt shine through the dash...i checked the dash at night before I put it back in and the glow from them was there so they are working but it seems that the markings (speedo increments etc ) would only allow white light ???....today fitted a nice momo woodgrain and leather steering wheel...cheers menace
Spent the day making rear draws and will get round in the next day or so fitting my new compressor and tank and do all the wiring for plugs and fridge and so on..
Pissed off the cheap HID's I got as a gift ( intensions were good ) and put the halogens back in.
Better, instant flood of light. No warm up required, is the only reason for halogens.
Fitted the new cover to my Hannibal roof top tent, fitted the tent up and doh have the cover around the wrong way. I fitted it the same way it came off but didn't think about the fact that as I am swinging the tent to come over the side instead of the back that the cover need to be turned to allow the zips to be access able along the sides and back :/ take it off tomorrow and turn it around so its all good.
Found the source of one of the annoying under dash vibrations. The center panel has the ducting for the vents, and the vents sit within the duct, but I suppose over time the Original foam around the vents becomes weak and doesn't provide the cushioning effect so the duct then has something to vibrate against. Fixed by putting foam tape around the inside of the duct. Annoying noise gone. :)
http://img.photobucket.com/albums/v9...F5E28C802B.jpg
Victory in the annoying noise department hey , well done!!!!
@ Mego, If you're not happy with the HID, Bi-xenon then look at Phillips range of Halogen lighting all street legal.
Installed the rocker switch for my work lights Finally!
Attachment 29620
Just got back from a pay and play weekend, and noticed I've snapped dampener bracket off the panhard rod..
Upgrades time.. :D
Kallen Westbrook
Owner of
Westy's Accessories
Its not broken, Kallens just told the GLF to Justify an upgrade, caught out buddy, big time
@ Kallen again next time you need something try the old cable tie on tail shaft trick
Me I've been taking away, taking away boost, Doing this 1/4 of a turn every other day, only
cause I still get over boost, every now and then. Funny thing is 4x4 feels better as boost goes down.
Still need to remove more until I can drive flat stick all the time without, over boost cutting in
23 yea old original part.. its had a very good life..
Its nothing extreme but a bloke up north east of lankoop. Nothing hard, just some dug out holes and very slippery clay.. some technical dug out sections which caught a few out..
Kallen Westbrook
Owner of
Westy's Accessories
Finally got my reconditioned sliders back on..
@ Dogman ,,,happy with them???
If anyone is in the market..
Attachment 29622
Tb42, 314000 on the clock. Small patch of rust in the gutter. If interested I can carry out a test drive.
Located mount gambier.
Kallen Westbrook
Owner of
Westy's Accessories
Changed the roof rack over for the one to suit the Hannibal roof top tent and the young bloke made up a bracket so the light bar can go under the rack, I just need to trim the wind deflector and she will be good. Also picked up a ferret dual light bracket as I cannot mount the light on the roof rack now. When the young bloke gets back we are ready to throw the tent back on permanently.
Can a mod turn my photos over please, don't know why they did that?
replaced oil pressure switch and resistor. no more stupid oil light. changed oil. all filters.
Doggie I see the problem now, I was standing on my head lol
Ps they are still upside down unless you enlarge them then they come up correct.
I get my Long Ranger 75lt sub tank fitted tomorrow morning at Western 4x4 (ARB).
Bummer.. well go over it before you take it home.. make sure you inspect all attaching points just incase the dodge it up or leave it altogether..
Kallen Westbrook
Owner of
Westy's Accessories
Installed UHF today. Looks good and works well so far.
http://www.nissanpatrol.com.au/forum...013/05/1.jpg?1
So non-stop to Noosa mate :)
Nothing, between work and rain I have been snookered.