A franga.....Quote:
Originally Posted by rusty00
Printable View
A franga.....Quote:
Originally Posted by rusty00
....for your swag.Quote:
Originally Posted by nissannewby
Sent from my SM-P600 using Tapatalk
Why would you buy an obsolete Albanian unit of currency? ;)Quote:
Originally Posted by nissannewby
Half price AA & AAA batteries at Coles. Buy up.
http://www.nissanpatrol.com.au/forum...015/08/349.jpg
Sent from my iPhone using Tapatalk cause AB turned it back on!!
Why do you buy that crap mate! Just buy rechargeables and be done with it! A dozen of em at $8 a set of four will last you shit loads longer than those crappy alkaline battery's!!Quote:
Originally Posted by MudRunnerTD
Sent from my Nexus 5 using Tapatalk
Just scored a brand new rear portion of my Beaudesert exhaust without muffler, for peanuts. So I can swap from straight through to muffler easily, 6 bolts.
Also bought a Redarc BCDC1240, battery tray, cabling, lugs etc.... for dual battery install this weekend.
Should give off a nice bark mate with no muffler.Quote:
Originally Posted by Hodge
You'll be busy. I mounted my bc dc under the pax side dash. Less clutter in the engine bay now.Quote:
Originally Posted by Hodge
Sent from my SM-P600 using Tapatalk
Will see how she sounds straight lol.
Also my bcdc will be back-fitted onto the battery tray and cabled appropriately. Looked neat on the 3L with a busy engine bay so, 4.2 engine bay will be cake !
Yeah i made up nice bracket in the 3ltr but i know these chargers dont like heat and will perform better when cooler so i thought while its out....
Sent from my SM-P600 using Tapatalk
Yeah, they down-rate them selves, when temps get high. I will put mine on the opposite side of turbo - I hope... (still waiting on batt. tray) and will go from there.Quote:
Originally Posted by mudski
Ive had a few to many close calls when merging or changing lanes because people are either too close behind me to see the bottom indicators or are expecting the dummy lights to light up so I bought a pair of working tail lights with indicators.
I've recently installed globes into my dummy lights for brake and tail which has been great but I really want indicators for that extra level of safety.
I bought these on Friday morningso hopefully they'll arrive tomorrow.
Attachment 61040
Portable fire bin and spit, to be honest i didn't buy it, it was my 6th anniversary present.
This is it all packed up takes up barely any room in the troll
Drop about $1100 on the camper lol.
New electronic 6 stud brake hubs with handbrake overide and new Ford stub axles.
New draw bar,
New treg hitch
And 4 new stabilizer legs as the old ones weren't long enough after the lift
Sent from my SM-G800Y using Tapatalk
A windscreen rubber, some chrome strips, 2 fuel senders and a plastic lens cover. $200 postage. Damn the American $.
Got a link or some info for the brake system?Quote:
Originally Posted by biggqwesty
It's a simple brake setup like hydraulic..
Just off eBay bloke. Went a 10" hub.
The bloke i bought the van from did a dodge and threw 10" hubs on 9" backing plates so atm it has no brakes.
If you want the hand brake setup make sure it's fitted or its a lot of stuffing around.
This is the hubs but I got stub axles and hitch from the same bloke..
http://www.pages.ebay.com/link/?nav=...243187&alt=web
Sent from my SM-G800Y using Tapatalk
@ Kallen can you activate the brakes via your
in-cab brake controller, for going say down hill
Link not working
Yes when I fit it all.
I adjusted the link.
Bought this locally
today for $274.60 with
money received for
birthday presents
Mine is actually
323500 B.
It is on special and
comes with a
reversible ratchet
attachment. Aussie
made too, which is
a bonus. I had to
replace my el cheapo
micrometer torque
wrench, because I
left it sitting on the concrete
in the sun, while I was working
on the Old Trol, wound up to
140 ft lb. Now it is
way out of whack.
hi i just bye patrol 4.2 engine it is good
i may upgrade engine to install turbo any idea
Do a compression test and bolt up the turbo mate. Have funQuote:
Originally Posted by same
Bought a 24mm rear sway bar for the GUIV and a pair of HD extended links. Can't wait to fit it up.
Where from Darren?Quote:
Originally Posted by MudRunnerTD
Sent from my SM-P600 using Tapatalk
Got myself a second cf50 waeco
Second hand 1 year old in good condition $400
Now to see if I can get my head around solar
Basterd! I want to replace my 32L Engel with something a little larger for family weekend trips. My 75L combi takes up way too much room in the back.Quote:
Originally Posted by BSRT.Beast
Sent from my SM-P600 using Tapatalk
Yeah my 60l is a good size but when I go away just by myself I wouldn't mind a 40l or something smaller for a few beersQuote:
Originally Posted by mudski
Lol. That was me, pre kids.Quote:
Originally Posted by lucus30
Sent from my SM-P600 using Tapatalk
2 50's is good fridge one behind driver and freezer/food one in the back.
Should I say will be good.
Should probably get that second battery first ay.
Pro Diesel in Drysdale. They had a run of custom made 24mm rear sways done. he made 10 and has 3 left as of today. $250 for the sway bar and the 2 HD links for the rear of the GUIV are Roadside from him too at $120. I broke my way bar on the snow trip and have broken Many links over the time so a 24mm sway bar was always going to break factory links.Quote:
Originally Posted by mudski
16t air assisted pipe bender.
That should make the bar work a bit easier.
Sent from my SM-G800Y using Tapatalk
Shiney new bits for the shed..
Attachment 61275
Bender, press ?Quote:
Originally Posted by biggqwesty
I know its friday but come on clunk lolQuote:
Originally Posted by Clunk
Quote:
Originally Posted by Clunk
Bahaha.Quote:
Originally Posted by nissannewby
Pipe bender clunky.
Hey, I know what a hammer is and thats all thats needed hey?Quote:
Originally Posted by nissannewby
Not exactly for the patrol but still Shiney
Attachment 61285