Trolatron

good work mate keep the pics coming i think my GQ is heading for the chopping block liking your ideas

Mate!!!! Clunk told me about the quarter chop which I just responded to, and then I see your thread - great job mate .. how did you go getting under/around the two body mounts at the rear?

Thanks a million for throwing this info up!!!!

Cool mate gunna pull mine apart today and see what can do over the weekend

[QUOTE=Bigrig;81074]Mate!!!! Clunk told me about the quarter chop which I just responded to, and then I see your thread - great job mate .. how did you go getting under/around the two body mounts at the rear?

I tell ya i was nervous about doing the chop because i have never done anything to cars befor as in cutting into panels and stuff but it came out ok .
I cut the whole quater panel off from the outside, I cut away the outside skin as in the first picture and bent it down out of the way then its not to bad to get in there and cut the inner skin off.
Just remember to pull all the wireing out especially on the drivers side or you will cut into them.
I drilled a hole in from in behind where the plastic cover goes over the fuel filler pipes, up in the drivers wheel arch to run the wires back in to the break lights.passinger side is higher so was ok.


Ray

[QUOTE=Trolatron;81267]

Quote:

---

Originally Posted by Bigrig

Mate!!!! Clunk told me about the quarter chop which I just responded to, and then I see your thread - great job mate .. how did you go getting under/around the two body mounts at the rear?

I tell ya i was nervous about doing the chop because i have never done anything to cars befor as in cutting into panels and stuff but it came out ok .
I cut the whole quater panel off from the outside, I cut away the outside skin as in the first picture and bent it down out of the way then its not to bad to get in there and cut the inner skin off.
Just remember to pull all the wireing out especially on the drivers side or you will cut into them.
I drilled a hole in from in behind where the plastic cover goes over the fuel filler pipes, up in the drivers wheel arch to run the wires back in to the break lights.passinger side is higher so was ok.


Ray

---

Right ... so what will it take to get you over to my joint? Don't worry about the distance, I figure an airfare will be cheaper than the repairs needed if everyone leaves it to me and dhuck!!!! lmfao

[QUOTE=Trolatron;2359]G'day Trolers,

My Patrol is nothing special its your run of the mil lifted 33ed and a cuple of
custom re molded panels with tree polish, and im loving it.

lol tree polish.............. I like that

Quote:

---

Originally Posted by Trolatron

Bigrig ---- Trolatron - tell me more, tell me more!!!
Bit of vinal from spotlight ( got the misses to do sewing )

---

I just showed my misses this thread and said can you sow this like this guys misses did and she umm'd and errr'd and did not sound confident at all...LMAO....BUMMER!!!!

Hahaha yes she is good with her hands...:thumbup:

wow excelent setup mate
keep those piccies comming

Quote:

---

Originally Posted by Trolatron

Yeh the bar came out ok im happy with it.

http://i279.photobucket.com/albums/k...o7/Cab1241.jpg

http://i279.photobucket.com/albums/k.../Cab1233-1.jpg

http://i279.photobucket.com/albums/k...o7/Cab1321.jpg

http://i279.photobucket.com/albums/k...7/SANY0583.jpg

http://i279.photobucket.com/albums/k...o7/Cab1460.jpg

---

Love that front bar mate!! I was so obsessed with the rear chop, I completely missed it!!! Outstanding!!