Need some help guys
i am trying to remove the timing chain but cant loosen the top cam sprocket its supper tight ... is there a trick to undoing it
Attachment 55573
Printable View
Need some help guys
i am trying to remove the timing chain but cant loosen the top cam sprocket its supper tight ... is there a trick to undoing it
Attachment 55573
Would you shock it first ,by giving it a "tap" with a hammer
I dunno, I undo things like these with impact air gun. If you can lock the flywheel than large enough breaker bar should help too.Quote:
Originally Posted by HV2002
Regards
Thanks guys....impact gun would be the go if I had one ..might try the hammer TD..other than that it's down to brute strength and a big assed breaker bar
You need to "crack" it if you only have a brako bar.
short and fast, buy tapping it with a hammer to shock it'
you'll break the seal of what ever thread liquid was used
If your budget doesn't stretch to an air impact set up...Quote:
Originally Posted by HV2002
Years ago I bought one of the Ebay 12 Volt rattle guns primarily for undoing wheel nuts.
IMHO they are very good value for money at $50 and the gun got so much use around various vehicles on suspension etc I am now on my 2nd one and don't go bush without it
Are you referring to the Kangaroo creek import 12v style rattle gun that winds up then thumpQuote:
Originally Posted by the evil twin
http://www.ebay.com.au/itm/DC-12V-Im...item20ee6d3fba
12V gun sounds the go
time and budget leaves me with a breaker bar and hammer ..LOL
Yes, haven't found a bolt yet they won't move including those "incredible hulk" torque bolts in the diffsQuote:
Originally Posted by threedogs
'K... but I would def would recommend one when you can...Quote:
Originally Posted by HV2002