Fish's GU ST Ute

Quote:

---

Originally Posted by gubigfish

Hey mate EGT gauge was fitted same time as the intercooler but initially was using the factory scoop, shes much smoother now with the new scoop, haven't taken her for a long enough drive yet to be able to see how much of a difference its made. Debating whether to get it tuned or just wait till I get the UFI 18G turbo fitted and 4" Airbox.

---

Hey mate I have a brand new millweld 4" air box up for grabs only been trail fitted but was a no go as the chev radiator was way too big pm me if interested

Thanks for the offer Kimbo but after my experience with the Millweld snorkel, I'm not keen to go with any of their other products

Got the ECUtalk connected up and took her for a spin, this is once I got back. The warning indicators behind here seemed less critical than those on the right and wanted to be able to see the ODO reading.

Attachment 64835

Intercooler fan now wired in to the relay, shes loud so I guess that's a good thing, be Interesting to know what if any difference it makes.

Quote:

---

Originally Posted by gubigfish

Thanks for the offer Kimbo but after my experience with the Millweld snorkel, I'm not keen to go with any of their other products

---

No problem mate what was the drama with your snorkel ?

The template they supplied was dodgy which lead to me cutting out more of the guard than was required, luckily my mate had some bigger pinch weld than what was supplied which makes it look better. Also them not supplying a 4" RAM Head with the 4" Snorkel. See the comparison photo in posts above and even though its powder coated black you can clearly see the welds in the pipe.

I find it strange that they would not supply a 4"snorkel head with a 4"snorkel. You dont often hear a bad word about any of their gear so I wonder whether others are having similar issues?

Quote:

---

Originally Posted by Absolute4WD

I find it strange that they would not supply a 4"snorkel head with a 4"snorkel. You dont often hear a bad word about any of their gear so I wonder whether others are having similar issues?

---

I'm not sure, I have sent them an email giving them feedback regarding it basically stating that exact fact why supply a 4" snorkel with a RAM head that is not 4"

Took the old girl to UFI to get a Dyno done and got them to fit a boost controller at the same time, major difference in my opinion compared to pre-dyno, can't wait to get an 18G etc

Attachment 65540

Quote:

---

Originally Posted by gubigfish

Got the ECUtalk connected up and took her for a spin, this is once I got back. The warning indicators behind here seemed less critical than those on the right and wanted to be able to see the ODO reading.

Attachment 64835

---

can you do a photo of your EcU talk from the front