G'day folks,
Keep the info flowing!
Regards,
RLI
Printable View
G'day folks,
Keep the info flowing!
Regards,
RLI
G'day Trendsetters!
The following e-mail below is the latest intell over!
"Thank you for your enquiry. As with every aftermarket turbo that we are aware of our turbo's are made in china. What I can tell you about our product is that we have tried and tested near on 100 different manufacturers and of these manufactures we have narrowed it down to just 2 that we found to be reliable and of a high quality.
We understand that there is a lot of negative information out there about Chinese turbos but our product is of a high quality and this is why we feel confident in supplying a 12 Month Warranty.
Regards,
Stuart Ingram"
E: stuart@autopowerhouse.com.au
W: Auto Powerhouse Online Auto-parts
P: 1300 268 455
P.O.Box 5135, Robina Town Centre, QLD 4230, Australia
I am 95% committed
G'day fellow Trendsetters!
I have conducted extensive research on upgrading my factory Turbo to an after market one, and i am 95% committed to purchasing one of Matt Craig's (United Fuel Injection) turbo's due to the fact that they use genuine Mitsubishi Heavy Industries (MHI) Turbos (TD05) and then modify them to suit there clients needs.
Matt, has certainly answered a load of questions that i have put to him over the last couple of days without any hesitation! Where as other Turbo suppliers, were reluctant or some of them would not even commit to provide answers to my questions! (There loss)
All the various forums that i have perused to gather my intell from, i have not viewed one negative complaint about Matt's product or his company's service! The only negative comment made was by another rival competitor, whom i found out had many complaints about his company and the turbo products that his company sold!
I sincerely hope, that this thread will help some of you out there, when it comes to your turn, if or when you decide to do a power upgrade to your GU TD42 engine!
PS, as a forum friend has said to me "do it once do it right"
Regards,
RLI
G'day folks!
I also spoke with Mike a week ago when i was conducting this research on up-grading to a better power option. He advised me between $2,000.00 and $3,000.00 to rebuild and high-flow my factory H18, fit an 3inch exhaust and Dyno tune the vehicle!
Mike dyno tuned my old 1999 GU 4.2 diesel in 2003 when i fitted back then a DTS turbo and DTS intercooler to her. When i fit my new United fuel injections TD05 turbo, I will be driving from Coffs Harbour to get Mike Vine to dyno tune her!
Regards,
RLI
G'day Trendsetters!
Just got off the phone to Matt, from United Fuel Injections, i have now ordered my TD05 16GYe-Haa turbo!
Regards,
RLI
:cheers:
Hey RLI
I have recieved a response from MHI themselves about their turbo variations. They have informed me that they do make the different sized components and that such a turbo exists. However these turbo setups are not available retail only through specified dealers.
Cheers Newby
G''day Newby,Quote:
Originally Posted by nissannewby
Good work work mate!
With our joint commitment, it is a great result that we both know that our product is the real McCoy!
Regards,
RLI
G'day trendsetters!
Hopefully, i will have my new TDO5 16G large Ye-Haa turbo by next Friday. Will keep you all posted!
Regards,
RLI
G'day lounge lizards!
Up date on my turbo purchase! I received my TD05 16G kit from United Fuel Injections in Western Australia.
http://i1067.photobucket.com/albums/...1/IMG_1389.jpg
http://i1067.photobucket.com/albums/...1/IMG_1391.jpg
http://i1067.photobucket.com/albums/...s/IMG_1547.jpg
http://i1067.photobucket.com/albums/...s/IMG_1548.jpg
http://i1067.photobucket.com/albums/...s/IMG_1649.jpg
I am very impressed with the results so far!
PS, for information on the TD05 16G or any other TD05 turbo, please contact Matt Craig from United Fuel Injections on;
Mob: 0439 900 921
Tel (08) 9259 3033
Fax (08) 9479 7401
Freecall 1800 199 701
www.unitedfuel.com.au
Regards,
RLI
RLI (or others)
What is that SS airbox outlet called?
I want it.
Where can i get it from?
Byte