i wasted some $$$ on a jaycar job before i went to jbhifi like mudski suggested in the first place and bought him one lol. do yourself a favour and get one of thsoe instead.Quote:
Originally Posted by Shazlic
i wasted some $$$ on a jaycar job before i went to jbhifi like mudski suggested in the first place and bought him one lol. do yourself a favour and get one of thsoe instead.Quote:
Originally Posted by Shazlic
Yep the Warlock kit is great value. I've have had it in there maybe two years? Or roughly when i made this thread, and the remote still works.
Sent from my SM-P600 using Tapatalk
Having a little trouble trying to fit steel mate alarm into 2002 gu.
My oem remote system was working fine but wanting to add the alarm.
And utilize the existing wiring for the central lock side of things.
going buy the wires feeding to oem central lock remote unit top right behind glove box, colours are the same as previously described.
oem plug
white = 12v pos,
2xgreen =2x indicators,
2xblue = 2xactuators.
steelmate
2x yellow =12v pos
2x brown = indicators
white and white/black = actuators.
Iv'e hooked up for pos actuators and not the neg ones.
obviously power & earth are connected.
The drivers door is a master right?
and the oem remote plug is connected to it, why would't it be!
press new remote lock/unlock and blinkers flash= working.
test light is showing white wires are active BUT
the lock/unlock actuators wont activate in either direction.
Nothing is happening!
put the oem remote back in, works just fine.
think I have a dud steel mate alarm.
thankfully I hadn't hook up all the other functions for the alarm, ignition cut etc as it appears that may of been a waste of time.
any one have any ideas?????
The drivers door is the master....
As for the trigger wires. Try the neg triggers. It might be different for your model car and kit.
Sent from my SM-P600 using Tapatalk
I have a warlock ac100 system but with just one central popper, the young bloke got it on special for $28 😳 it's been in for a while and now it's stopped working so I will change it out for a new one as I have three spares. The unit tries to move and clicks but won't open so I will change it so hopefully it works.
I'll check the output of oem unit asap.Quote:
Originally Posted by mudski
steel mate kit can be either pos or neg.
was just going by pos being the way things were, see soon.
Hi All,
Bit of a thread dig I know but Im about to embark on same project. I have pictures below of my alarm wiring, and they way I THINK I should wire it. My questions are:
Does the wiring diagram look ok?
Should there be an earth for the door lock actuators?
Thanks in advance.
http://i58.photobucket.com/albums/g2...8/IMG_3014.jpg
http://i58.photobucket.com/albums/g2...8/IMG_3015.jpg
http://i58.photobucket.com/albums/g2...8/IMG_3017.jpg
Looks fine to me. Hard to tell on my phone though.
Sent from my SM-P600 using Tapatalk
Thanks....................
What kind of unit are you using. I really need to pull my finger out and do this...Quote:
Originally Posted by shaun100