Specially after givin his misses that cubic zirconia engagement ring lolQuote:
Originally Posted by Bigrig
Taps a lot!!!!!!
Printable View
Specially after givin his misses that cubic zirconia engagement ring lolQuote:
Originally Posted by Bigrig
Taps a lot!!!!!!
Are you after a 4 speed or a 5 speed tailshaft ???
Is it for petrol or diesel ???
There are many different lengths
all the world loves a tighty Wodonga was actually my next port of call but when i seen this thred i had to try will look at those sites you mentioned as well have found some bits and pieces like front sway bar 25 bucks complets brackets nuts bolts etc rear tail light free has a crack dont know if that will pass roadworthy but i can put resin in the crack which may make it invisable who knows its window glass and winder causing most grief but youve helped so much a big thank you for your help
robert
Quote:
Originally Posted by cliff
Looking for a tank to replace aux fuel tank on GU patrol. Want something that holds fuel & water.
Cheers
You know it clunk, nah no ring either. I haven't had to fork out that $30 yet, its gonna hurt the bank when it finally happens lol
Yeah tell me about it, almost killed me, even had the debt collectors on me back for missing a couple of monthly repayments hahahaQuote:
Originally Posted by Warnie
Taps a lot!!!!!!
sorry warnie, but a mate has taken them off me.
I'm after five 17" x 8" alloy rims to suit a GU.
Please PM me or ring me on 0400 250 734 if you have some or know of some for sale.
I'm in south east SA so the closer the better :cheers:
Dave
Gday all just asking around for any old G60 utes or Wagont that may be for Sale,Lookign for old Retired/Rough one for parts ect ,let me know cheers
Is Nissbits in Vic?
MQ Mad May post you one!
Tim
Hi I have a 99 GU 2.8 turbo diesel chasing a mechanic in Darwin to replace the timing belt, would prefer a cashie on a weekend if anybody knows anybody please let me know!
Thanks
Ben
Got a set in Townsville They are Dirty out of the 89GQ i am wrecking $50 for my time to remove em and ther yours you just have to get em south
Does anyone have any parts for an 83 MQ ute? Something like doors, windscreen, free-running hubs, etc.
around the sunshine coast/Brisbane region. would be mighty helpful.
cheers, Dec
I can help with some hubs.
Tim
Umm 4.2's dont have a chip... Its mechanical injection... And they didnt make a 2007 patrol with a 4.2 in it... Sorry
Hi bordertech, feel like a drive to Kilsyth? It's in east Melbourne, not too far from Boardertown. http://www.ebay.com.au/itm/Nissan-GU...item35bc1d3361
Just the rims, no rubber. Probably asking a bit much, normally they go for around $240 or so each on this site, but if you're after the 5 then he says he's willing to negotiate. Says centre caps, but doesn't say if wheel nuts & safety indicators are included. Have you tried Nizzbits? I heard he might be able to do them for about $300 each with the 5th one free, but you'd have to check with him.
cheers,
Yeah heard about nissbits ones. Can you pm me when you know a total price please? I know where Kilsyth is.Quote:
Originally Posted by Dingo55
Cheers.
BYW dpes anyone know the load rating of the GU 17" alloys?
Cheers
Can you get a set from Old Bar in NSW to Bordertown?
If you can get a cheapy of freeby deal we might be able to do some business.
I've got 1 that has not been on the road and 4 with 50% tread OEM Tyres.
4 Caps, no nuts or indicators.
1 rim has a gutter rash small but still there.
Would want $1250 though.
Cheers Macca
I think there were a lucky minority that got the 4.2 in 07 but as said no chip.
Quote:
Originally Posted by Moorey86
Hey mate how about heading over to the intro section and say g'day before posting comment or questions. I'd appreciate it.
Also note. PNGPatroling is in Papua New Guinea and has a Japanese import without Australian ADR restrictions. He Indeed DOES have a 2007 TD42 non intercooled GUIV.... Hell Yeah!
See ya learn something every day! Welcome to the forum.
Banjo, good luck with your search for the intercooler. If you can't find a second hand one think about fitting up a front mounted one. I would be fairly easy, plenty of room and readily available pretty cheap. Oh, and Much bigger than the Nissan job.
Wanted an air fllter box for a GU ZD30 motor , bare no extras
thanks
Still looking
There is one on eBay ATM
There is one for sale on patrol4x4 forum. Just went up?
If you get rid of your muffler you can fit a water tank in that side which is better balanced and does not need engineering.
Thanks for the offer man, but cant get them down here. Ill just keep looking, I don't need them for another 2 months.
the knob is for idle up on a cold mornings not a hand throtle and shouldnt be used as a hand throtle as there is no quick release in the case of an emergencyQuote:
Originally Posted by PattyWgnOwen
Hi all, I'm chassing a set of Sidesteps & Brushbars to suit 2001 Series 3 GU Patrol Wagon. If I can buy them at the right price I'll do that rather than making my own. I know I'm a bit lazy, but it's worth a try. PM me if you've got some for sale.
Cheers,
Rick.
Thank's guys, not needed any more, bought some new.
Correct. That is why I want it. Car has a remote start function which fumbles on cold mornings. My apologies for using the wrong terminology.
---
I am here: http://tapatalk.com/map.php?yfbeks
does the gq one fit
G'day everyone, I'm in search of a standard garrett turbo off a 3ltr GU.
I'm located in Brisbane but willing to pay for postage.
Cheers
I don't have access to a GQ to see what it looks like. If you can email me a photo? Owen@eastcoastbuildingdesign.com.au
thanks for that, I got it on watch now, he wants a bit much for it ($400) but I will call him after it finishes, I doubt it will go & good luck to him if it does
Mate I have the rear corners, the alloy rear step and the two inner corner brackets off our 99 2.8 GU? The lights still function, however I cut the loom to use the plugs on the steel bar, so a bit of easy rewiring is required. The corners are gold/silver colour
Will these suit your needs?....currently sitting in my shed annoying me, in North Brisbane.
Morton,
I've got one off my '06 GU IV after fitting a kaymar bar but don't know if it will fit your trol. It's gold, has the inner steel mounting frame, with mounting blots, no lights, in good nick, $200 Brissy.
cheers
The tail lights rear qtr and flares all different. I would not think it will fit.
Thanks for that, but as I JUST put in a new Stainless Steel exhaust last week, I don't think I'm prepared to remove it just yet. But I hear what you're saying, thanks for the advice
Patty, I measured a '03 & '06 GU today both STs. The rear qtr & flares are the same, the distance of the flares & tail lights from the top of the bumper is the same. The bottom of the tail lights on the '03 & '06 start at the same place on each body but the '06 lights extend higher on the rear qtr panel. Only difference is the full plastic bumber covers the center break away U bolt - won't call it a tow or recovery point because it's not. If you fit an '04 or newer plastic bumper on an '03 or earlier, then you would need to fit the extension piece in the centre of the rear subframe, otherwise you won't be able to bolt on that break-away U bolt. Have a look at the attached pdf, page 2 & look for that additional piece - part # 51132. Morton's trol won't have that part. I think it was introduced from '04 onwards.
cheers