AB's new GQ is finally here

Bar on...

BA, that bar was hard work...lol...slightly bent left hand slot, only one way to put that on using the rear bolt to lever down but came up a treat, thanks mate!!!

Where to mount number plate???

Quote:

---

Originally Posted by AB

Bar on...

BA, that bar was hard work...lol...slightly bent left hand slot, only one way to put that on using the rear bolt to lever down but came up a treat, thanks mate!!!

Where to mount number plate???

---

I want one of those bars, I will gladly swap my tube bar for one

How did you go with the antenna coax?

Quote:

---

Originally Posted by Winnie

How did you go with the antenna coax?

---

Yeah all done, thanks bud...

Quote:

---

Originally Posted by AB

Cannot believe its been over 2 years since I updated this thread!!

So much has been done since then. Ill update this page soon.

A lot of love is happening to my gq in coming weeks as it started to get neglected and treated like a pig so stay tuned!

Just finished putting a large wrx front mount ic in, moved the condenser back to allow room and amazingly it fit snug behind the grille by just removing the fins and covered with new mesh, sprayed the grille black too.

Got very lucky (although it was planned) that the entry and exit points from the ic snugly fit just under the headlights where the plastic mould of the grille comes out further, otherwise I would of had 3" pipe coming outside the grille looking very ugly!

My tyres are almost done so I'm upgrading to 35" km2's.

Going to cut front and rear guards to accommodate the new tyres, get some better flares on as well. The Bunnings flares are just crap, I have ruined them and makes the car look rough!

Install new satphone dock that was under warranty.

Get ba's bar on, rebuild high mount and install.

Rear quarter chop may be done whilst cutting guards too, still deciding...

Looking at using large custom shs for rear bar to suit the gq box look, prefer that look then tubes.

Upgrade turbo and pump in the future as well but no idea on what I even want to be honest. As matty mentioned, ill check out some other members set ups for inspiration...lol

Lots happening though!!!

Stay tuned.

---

Creating a list for myself...holy crap!!!

New bolts for 3d's recovery points due to new bar
Sat phone dock
New km2
High mount rebuild install and fairlead, rope and controller
Rear quarter cut and front guard chop
Front mud flaps
Rear bar
Upgrade turbo and pump, 3" elbow to inlet manifold
Need rear slide windows
Rossco selling me his arb compressor when he gets his air locker
New airbox
Indicators on new bar
New water bottle
Mesh on roof rack
New flares
Door hinges
Put a half decent stereo and speaker system in...lol.

What size km2's

Quote:

---

Originally Posted by growler2058

What size km2's

---

I may as well get 35" mate. It's just a fun car these days and only gets driven to go 4wding.

Trying to work out how I can get 15k to get Leah a nice family 4wd for family trips..lol

Quote:

---

Originally Posted by Ben-e-boy

I want one of those bars, I will gladly swap my tube bar for one

---

I've got one but your a tad too are away. They stick out too far for my liking and decrease approach angle

Quote:

---

Originally Posted by Clunk

I've got one but your a tad too are away. They stick out too far for my liking and decrease approach angle

---

The bar that I gave johnathan is actually the best winch bar you could get for a low mount winch but maintaining maximum approach angle.

This definitely sticks out a lot more but obviously needed for the highmount.

Quote:

---

Originally Posted by AB

The bar that I gave johnathan is actually the best winch bar you could get for a low mount winch but maintaining maximum approach angle.

This definitely sticks out a lot more but obviously needed for the highmount.

---

Hey BA, want to swap? Lol