What has made you Angry Today???????

Leave it for a bit... sometimes they come good.

Quote:

---

Originally Posted by AB

Had my Milwaukee set for years running on two batteries, all been fine.

My brother took one of my batteries to use in the lantern work light whilst we were camping last weekend.

Just threw it in charge and its not charging, charger is flashing red!!!

---

It might just be a little dirty and not making contact. Not sure if they did when you got your tools, but the have a 2 year warranty on the batteries.

Quote:

---

Originally Posted by Bloodyaussie

Leave it for a bit... sometimes they come good.

---

It's come good all of a sudden...lol

Being flashing green and red for over 24 hours now but now working!!!

I know it can do that if the battery is hot but only does it for 10 mins.

Yay!!!!

Quote:

---

Originally Posted by lhurley

It might just be a little dirty and not making contact. Not sure if they did when you got your tools, but the have a 2 year warranty on the batteries.

---

Yeah it is sitting in my famous dust bowl carport...lol

Unfortunately these batteries are about 3 years now.

If it happens again AB put the battery back on the for ya dn run it fully flat or on a tool with the trigger on until it is fully drains and try again.

I have a Makita one that has been telling me for 2 years that it's shagged but comes good every time.

Yeah cable tie the trigger until it is completely dead then start again.

Quote:

---

Originally Posted by growler2058

Whats stopping the troll? Whats wrong with it

---

Off the top of my head

Crack in passenger side floor
Rear sway bar ( I had one, but for the life of me can't find! )
Needs drop boxes
Everything that has a bush need replacing
New disc's ( can't be machined anymore ) and probable pads
Steering wheel needs replacing
Bull bar needs modify 2 suit body lift
Engineers certificate for a 4inch lift and 2 inch body lift

That's probable only the start

far...king trying to get organised...one step forward...two steps back..fitted awning put up rooftop to make sure everything is going to fit right..take tent off bolt on awning..put tent back up..then realise I haven't put the rubber in the roofracks slides..take tent off,put rubber in tracks,put tent back up and now the bolts are too short..Arrrrg,then thinking it's stuff it i'll just take a tent for the kids..less stress...then check the tryes and I might have to put a set on before we even go...double arggg..

Oh yeah and the boss came around and I have to get the cattle in and drench them this arvo and draft off 50 for a truck load for tommoro morning...don't mind work but shit it's all when I'm under the pump..want to be able to knock off work Thursday or Friday hop in the car and point it north..

Quote:

---

Originally Posted by NissanGQ4.2

Off the top of my head

Crack in passenger side floor
Rear sway bar ( I had one, but for the life of me can't find! )
Needs drop boxes
Everything that has a bush need replacing
New disc's ( can't be machined anymore ) and probable pads
Steering wheel needs replacing
Bull bar needs modify 2 suit body lift
Engineers certificate for a 4inch lift and 2 inch body lift

That's probable only the start

---

Is engineering hard to get? Is it exxy $$$$?