Mudski GU Build Thread

Quote:

---

Originally Posted by mudski

Once the tags are on, I'll be sending it off to be sandblasted then powdercoated. Any suggestions before I take it away?

---

How are the moccy's holding up??? Need a new pair yet or getting them sandblasted as well!!!
Have you done a test fit to the vehicle? How much plastic grill do you have to remove?

Cheers
Trevor

Quote:

---

Originally Posted by tryan277

How are the moccy's holding up??? Need a new pair yet or getting them sandblasted as well!!!
Have you done a test fit to the vehicle? How much plastic grill do you have to remove?

Cheers
Trevor

---

Mate the moccos are holding up really well. I will require a new pair though, which I'll get as soon as the Vic markets re open. Lol. Not sure on how much grille I'll have to remove, I'll get to that when it comes to fitting it up.

So now I have to wait until ARB get my bits in. I hate waiting....
So I’ve pulled the dash apart and will start on the in cab wiring of the isolator and winch in/out switch.
Looking at the back on the in/out switch there’s too many pins, 7 of them. Lol. Anyone have a wiring diagram for this part?
Attachment 81141
Attachment 81142



Sent from my iPhone using Tapatalk

I’m going to move my light bar and spotties switch to down on the gear shift console too so the winch switches will be in the best spot.
Attachment 81143


Sent from my iPhone using Tapatalk

Quote:

---

Originally Posted by mudski

So now I have to wait until ARB get my bits in. I hate waiting....
So I’ve pulled the dash apart and will start on the in cab wiring of the isolator and winch in/out switch.
Looking at the back on the in/out switch there’s too many pins, 7 of them. Lol. Anyone have a wiring diagram for this part?
Attachment 81141
Attachment 81142



Sent from my iPhone using Tapatalk

---

Hopefully this helps. .
http://www.nissanpatrol.com.au/forum...020/05/161.jpg

Sent from my SM-G930F using Tapatalk

Quote:

---

Originally Posted by mudski

So now I have to wait until ARB get my bits in. I hate waiting....
So I’ve pulled the dash apart and will start on the in cab wiring of the isolator and winch in/out switch.
Looking at the back on the in/out switch there’s too many pins, 7 of them. Lol. Anyone have a wiring diagram for this part?
Attachment 81141
Attachment 81142



Sent from my iPhone using Tapatalk

---

I can't remember for the life of me mate. Might have something on my build thread if not there's always your two other friends Google and YouTube..

Sent from my CPH1979 using Tapatalk

Quote:

---

Originally Posted by mudski

Mate the moccos are holding up really well. I will require a new pair though, which I'll get as soon as the Vic markets re open. Lol.

---

https://www.facebook.com/groups/1444...8026831490128/

Sent from my CPH1979 using Tapatalk

Quote:

---

Originally Posted by Rossco

Hopefully this helps. .

Sent from my SM-G930F using Tapatalk

---

Thanks.
Just gotta work out the schematics of it all. Do I need to use any relays? Also I'm thinking of getting some small 2mm, or similar, 7 core trailer wire and use this as a loom to out of the cab. I should need anything heavier you think?

Yeah think I just sketched it all before I did it to get my head around it all. Trailer wire should be fine, don't need any relays big solenoid does everything. Worth thinking about when you do it is putting buttons up front on the bar very very handy and also some strip lighting above the winch which picks up power fron the isolator, very handy in the dark obviusly. . .

Sent from my SM-G930F using Tapatalk

Quote:

---

Originally Posted by Rossco

Yeah think I just sketched it all before I did it to get my head around it all. Trailer wire should be fine, don't need any relays big solenoid does everything. Worth thinking about when you do it is putting buttons up front on the bar very very handy and also some strip lighting above the winch which picks up power fron the isolator, very handy in the dark obviusly. . .

Sent from my SM-G930F using Tapatalk

---

Yep buttons on the bar are a must! I left them out and really regret it, running out the winch rope solo is a mission now. Need to find some motivation to add them in.
A light above the winch that illuminates when you activate the in cab isolation switch is also a bloody good idea too, I didn't do that either damn it.

Sent from my SM-G960F using Tapatalk