Printable View
This is exactly what I want to do in the new year after speaking with Mark the other day. This pump which is around $450, not including fitting, and a RC radiator, together with full system flush.Quote:
Originally Posted by mudski
http://www.nissanpatrol.com.au/forum...id=63378&stc=1http://www.nissanpatrol.com.au/forum...id=63379&stc=1
Ehats wrong with your current radiator?Quote:
Originally Posted by Hodge
Sent from my SM-P600 using Tapatalk
It's half blocked up. I could get it cleaned out and rodded, or I could start again with a fresh 3 core unit.
Started doing the gearbox mounts tonight and all was going well. Cross member out ready to undo the mounts.
http://www.nissanpatrol.com.au/forum...015/12/133.jpg
Drivers side out and in, easy
http://www.nissanpatrol.com.au/forum...015/12/134.jpg
Then the passenger side, 1 bolt out and then this happens, not happy Jan!!!
http://www.nissanpatrol.com.au/forum...015/12/135.jpg
Err thats a bummer. Hope you got some good drill bits and enough room to drill into it.
Sent from my SM-P600 using Tapatalk
Your telling me. Theres no reason for it to be that tight, all the others once cracked were pretty much finger tight to get out, I don't get it. I'll try an hit it with a punch and see what happens, if not then start drilling and head up the shop in the morning for some Easy-Outs.
Hmm good luck.
Sent from my SM-P600 using Tapatalk
That might do for tonight, have to go up the shop later and get some tools and another bolt.
http://www.nissanpatrol.com.au/forum...015/12/137.jpg
http://www.nissanpatrol.com.au/forum...015/12/138.jpg
What a bastard, at least it's not in a awkward spot.
Not a welcome site broken bolts, good luck.
some freeze spray up the center of hole may help to shrink it a little to help loosen it.