If you have a look over at iknifecollector.com where I am also a member, there is heaps of info there on different brands and their markings
Printable View
If you have a look over at iknifecollector.com where I am also a member, there is heaps of info there on different brands and their markings
OD, have you been on the Australian Blades Forum? Any good?Quote:
Originally Posted by oncedisturbed
Heres a handy gadget for your folder
http://www.ebay.com.au/itm/261356496...84.m1423.l2648
That is sweet TD, will have a look at them properly.
@HL - yup I am on AB forum as well, some good info and lots of experienced makers on there as well. Bit pricey for their gear though
@ OD they also sell a small brass clip that does the same thing, postage is the killer there
I joined a few months back baut haven't had a chance to have a good look around the site.Quote:
Originally Posted by oncedisturbed
Postage still the same if we all purchase a few?Quote:
Originally Posted by threedogs
Not sure tbh, gonna see if I can tap into a few contacts and see what they use
@ OD as I'm not up to par with folders , how hard would it be to change blades?
want to buy a 110 Buck and fit a Damascus blade to is, which you can buy. easy yes or,,,,,,
http://www.ebay.com.au/itm/221085421...84.m1423.l2649
Sweet. It will depend on how the bolsters are fastened. The 2 I am making at the moment have a single pin in the top bolster which also secures the blade and the bottom bolster has 2 pins securing the bottom back spring in place.
If you can see the pins then very easy to replace, bit harder if the pins are hidden inside as part of the top boslter unless the top bolster is only a civer for show then it should pop off