Trying to remove my dump pipe which is still stuck in the car and bumping the coolant hardline to the turbo and cracking it leaking coolant everywhere and now having no car to get around in -.-
Printable View
Trying to remove my dump pipe which is still stuck in the car and bumping the coolant hardline to the turbo and cracking it leaking coolant everywhere and now having no car to get around in -.-
Yeah that would make me angry bummer ehQuote:
Originally Posted by Nicholas68
Gives me something to do tomorrow at least I suppose, as long as I get it done tomorrow
Having to pay 3.5% duty on my new car ouch!
Rego in Victoria going up again...... fwarking dogs !!!!!
Go on keep taxing the shit out of us and then waste the money on bullshit...
Bloody realized the bottom windscreen seals are peeling off a bit on each side of the car... Pissed I didn't notice earlier. Now I'm sure the windscreen overlaps under the seal, so water doesn't get inside???
Attachment 46502
that part of the seal is ok its when they stuff up the corners and instead
of re sealing the lot they cut the rubber and push excess in with a screw driver
Quote:
Originally Posted by Hodge
Well fark me... must be blind! I can not see anything wrong with your seal mate.... Can you please enlighten me or post a better pic...
Besides the bit you are pulling back it looks good...LOL
Sorry about the bad photo, when I took it i thought it would show the issue better. Basically that strip I'm touching, is lifting up away from the windscreen about 2-3mm.
About a foot or so, from each side of the car. The rest of the strip in the middle of the car is fine, sitting flush on the windscreen and not lifting up.
Now I've never seen a windscreen fitted etc... So i don't know what it looks like or what it should look like, I'm just concerned water may have been getting inside.
Eric I think you are losing the plot!!! He he