Dont encourage him 4bye my eyes still burn from the last time pictures were posted.
Printable View
Dont encourage him 4bye my eyes still burn from the last time pictures were posted.
Tough Dog 2 inch lift kit for my GU. Shocks, springs, steering dampner and caster bushes.
Will install on Thursday if I am not working.
I have the same suspension set up as you, my springs are King but will be similar.
It works very well and I did fit the caster bushes but not for long as they didn't last. There is not much rubber on one side so given a bit of use they failed.
Use stock ones now and the car drives/steers well without any wheel wobble etc. tyre wear is good too.
If you are not on heavily corrugated roads or need a lot of flex it probably doesn't matter.
For a 2" lift it is borderline that the correction bushes need to be used, just my experience.
You will enjoy the improved suspension one it is fitted.
Also I had to fit an adjustable steering rod to centre the steering wheel, Mr Nissan fitted a non-adjustable one in my car.... WTF?
I bought a 3D Mirascope for when the grandkids come down for the holidays, but now its just freaking me out.
Wow, that is cool Mudnut, just Googled it :-)
Thanks for the tip mate, educational Chrissy prezzies here we come !
I bought two packets of sliced bread to day, as I wanted to loaf about and tomorrow I`ll buy a couch so I can lounge around.
you idiot :)
picked up the UFI hi flow fan and clutch hub assy and a water separator filter for the fuel system, i have heard good reports on the ufi clutch hubs so we will see how it goes.