Printable View
Welcome to the forum. It's always nice to post an introduction before asking questions.Quote:
Originally Posted by stormboy9
You need 25 posts up to get access to the manuals but check this thread, it has some photos that may assist you; http://www.nissanpatrol.com.au/forum...ght=front+hubs
Tony
This is my first message posted, I am replaceing the front discs tomorrow,on my 2003 GU patrol ,an exploded view of the hub assembly would be helpfull,can you help?
If you check the link in post #81 there are photos that show how to pull the hub apart. Once you have the hub off it's only 6 more bolts to remove the rotar.
Tony
mmmmmmmmmmmmmmmmmmmm
Thanks Tony, for the photos. As you have probably gathered I am not that flash on the computer,this is the fifth 4 wheel drive I have had ,all from new, the last three have been Nissan Patrols, the reasons, very reliable, good performance.
cheers
Les
That's the same reasons why all 7 cars I have had have been Nissans, 4 of them Patrols.Quote:
Originally Posted by stormboy9
You're doing OK on the computer.
Tony
this is awesome & thanks, but for some reason its not allowing me to download it :-(
and I have done my 25 posts..cheers :-)Quote:
Originally Posted by Major Black
This was supplied by AB on another PostQuote:
Originally Posted by Major Black
If you have made 25 posts and cannot download the manuals then the chances are that you never confirmed your email address when you signed up.
When you sign up and give your correct email address then a welcome email will be sent to you which will have a link to confirm you email is correct.
This stops people spamming the site, etc.
If you don't confirm your email then you get stuck in a category which will not let you download the manuals no matter how many posts you have made.
If you can't find your email or gave the wrong email address when you signed up and you have over 25 posts than just send me an email with your username and I will fix this for you.
Cheers
Andy
sorry mate not up on these computer stuff yet but will learn trying to change my radio in my patrol so need the wiring
Welcome to the forum Bluey, you need 25 posts up to get access to the manuals. Why not drop by the introductions section and tell us a bit about yourself and your Patrol.
Tony
only 24 posts to go before i can access this manual can't wait need to replace belts on my nissan. what a big job!!! should have put it in the shop.
Welcome to the forum mate, introduce yourself in the introductions section, join in some conversations and you'll have 25 posts up in no time...Quote:
Originally Posted by turners
Enjoy!
I originally bought the GQ many years ago for over $100, what a find. Well done and thanks
Wow this will make some light bed time reading.Quote:
Originally Posted by AB
Thanks for this great resource!!!!!!!!!!!!!!!
hi
we are from iceland, and we are having some problems with our Nissan patrol 94, y60, 2,8. the oil pump faild (we think) lots of nois in the engine, almost like a hamer inside it, but we cant find any manuals on how to put the engine back together
Hi mate, if you read through, you should put up an introduction and then have 25 posts and then you can download the manual. But the guys here are really helpful and you will find they will try to help you. You may need to wait a little while as it's 4am here, and no-ones awake.Quote:
Originally Posted by dagny78
Ummm...not to sound like a dill but this would be ok for a 2000 model as well wouldn't it? I am looking for something to go over before pulling injectors out lol.
Thanks guys . Hoping this will give me the answers i need .
Hello all,
Writing from Canada,
will possibly become more
entertaining after 25 posts!
interested in Fixing a 4.2 diesel.....1989 safari
Right On!
The manuals are free now and you don't need 25 posts to download them. let me know if you are having issues downloading them?Quote:
Originally Posted by luna-sea
Hi Andy ,just wandering if the 1998 GU manual is the same as the 1999 GU manual.If not, do you know where I can find one? Thanks
Hi mate I don't own a gu and haven't read this but I'm pretty sure there is no difference at all.Quote:
Originally Posted by Donbar
Hi mate check this thread out http://www.nissanpatrol.com.au/forum...nual-Version-8 and view my post with the pic, is this the manual your after?Quote:
Originally Posted by Donbar
Grant here,, just signed up,, been looking for a manual for my patrol pickup... been a truck for me and want to keep it going well, but have some serious vibration coming from the front end.. not sure if it is a bearing or not, ,but the truck is only 3 years old.. hope you guys can help.
Quote:
Originally Posted by AB
G'day mate - two quick ones - if you could throw your intro up in the introductions section as not everyone goes into the manual thread etc, and there is a few threads in here on the vibration issue - use the search function mate and you should find them, but if not just open a new thread and no doubt you'll get plenty of advice.Quote:
Originally Posted by Danni
On the vibration issue - have you checked all bushes, boots, rubbers, joints, arms, etc on the front end? Have you checked the tyres for any signs of delamination (the tread coming away) or bubbles/out of round? Have you just fitted large negative offset rims? And have you jacked up each side and given the wheel a good "wobble" to suss out if it could be the bearings? All goods things to check, and let us know if you need any assistance/further information.
Welcome aboard mate!!
hey guys.... im having trouble downloading this manual?
i have a mac, when i click download it comes up with a page saying click the link below but it does nothing?
i need the wiring diagram for a 98 gu rd28, if somone could help out it would be much appreciated.
thanks grant
I have the manual on my work computer and will be down your way today, call me on the number I sent you by PM.Quote:
Originally Posted by oxe351
Tony
Thansk Tony.Quote:
Originally Posted by oxe351
What browser are you using?
In Firefox or Chrome when you click the link it downloads the manual and only shows you a little download icon in the bottom left of the screen. Some people don't realise that they have actually downloaded it and keep pressing the button and thus download about 10 copies of it...
Have a look at your downloads folder on your computer which is normally under your username folder...I have no idea about Macs but it should be the same location I think?
Hey Oxe,Quote:
Originally Posted by oxe351
i am on a Mac too mate and i have the manuals.
From memory it sends you a URL link that you have to post in a new tab in Safari and then it will download for you. Check your history section on your hard-drive also for stuff under "today" and you will probably find it. Do you have a seperate little popup that comes up to show you when you are downloading something? if you do then just click on that and it should open the file.
The file is over 1200 pages from memory and will likely go to your downloaded items folder by default and it will want to open in Adobe. do you have the latest Adobe?
Cheers Darren
thanks guys, just worked it out.
just gotta search through and find what i need now =)
once again thanks for the help..
grant
Hi, I am from Fiji and am looking for a service manual for my Nissan Patrol Y60 series vehicle. I am having problems with the sound that seems to be that of the Tappets and would like to know what the valve clearances are.
I hope someone can help my on my problem.
Hi mate, you need to have 25 posts to download the manuals. Simply join in some light hearted conversations, ask any questions, welcome some other new members and you'll have the manuals in no time.Quote:
Originally Posted by andmalis
In regards to the valve clearances, have a look at this thread = http://www.nissanpatrol.com.au/forum...pet-Adjustment
Thanks for the great find AB
does anybody know where you can get the tb45 service manual
G'day M8, just joined this group as i've recently bought a 98 GU 2.8 TD.... Think my clutch is on the way out after a trip to Morton Is where I had to drag a Toyota Landcruiser half way around the bloody Island.... could u help me out with some technical info? Cheers Bretto.
Hey Bretto, just post 25 posts up mate and the manuals are yours, easy to do just don't post up any crap ones mate.Quote:
Originally Posted by westy_1973
Why not everybody else does *LMAO*Quote:
Originally Posted by The Dogman
I think Dogman is sayin be warned he is on guard, don't worry Bretto he doesn't bite much *L*
G'day AB, thankyou for your information, great to see people helping out their fellow 4Wheelers. Unfortunately I haven't got 25 threads up so I can't download it yet, what I would like to know is does this manual cover the GU 4.2TD as well
Cheers, Rick,
Yes mate, it should cover that. I havent looked at this one but I'm pretty sure it does.
Just go welcome another 2 members mate and you'll be good to go.