I have been told clutch indistries are no good and to stay away? Dunno how true it is just what I've been toldQuote:
Originally Posted by mudski
If you're happy and you know it tap a post!
Printable View
I have been told clutch indistries are no good and to stay away? Dunno how true it is just what I've been toldQuote:
Originally Posted by mudski
If you're happy and you know it tap a post!
Anyone inform me of BA's location?
Or by the sounds of it, AB's driveway location...
Pm me if you know.
And anyone keen to car pool across from SA, south west vic?
Sounds a great oppertunity to put some faces (although grubby) to some screen names..
Ill send threw cash tonight.
Kallen Westbrook
Owner of
Westy's Accessories
Quote:
Originally Posted by Westy's Accessories
Awesome mate!!!
My misses is going to love this 45 blokes turn up....BAHAHA!!!!
Party time indeed!
I have a Clutch Industries 4Terrain kit in my troll and theres no problems here. They even got a good rap on 4wd TV the other week. The 4Terrian by CI or the Exedy Safari Tuff clutch are the two top kits of choice. 6 of one and half a dozen of the other...Quote:
Originally Posted by Winnie
Ha, could be worse, might be 65Quote:
Originally Posted by AB
I can vouch for Clutch industries, had a drama with a clutch for a vy ss ute they sent 2 faulty ones out the third i went to their warehouse and they gave me a a flywheel thats worth over 1g for nothing ( fault being the flywheel was drilled wrong) and they even gave me a poster and a footy haha best customer service i have come across in a long time !!!
[QUOTE=AB;349233]Awesome mate!!!
My misses is going to love this 45 blokes turn up....BAHAHA!!!!
I understand her concern..............if 45 Queenslanders were turning up, she'd be a lot more happier :-)
[QUOTE=NP99;349241]Why? Would you all turn up wearing nothing but dock stickers?Quote:
Originally Posted by AB
I can't answer that one! :-)
Please stay on topic guys...
As I asked before about the front bar.... If Kallen comes then I know we will have one metal worker there!!??
Post a pic BA of the front and the inside that will help a bitQuote:
Originally Posted by Bloodyaussie
We are. We're discussing the dress code for the meet up at AB's. :) Anyhow, BA, read the text I sent to mate.Quote:
Originally Posted by Bloodyaussie
What are you doing with front bar BA ?????I'm going to my laser cutters in the morning.
I'll speak to him about cutting a winch mount to suit for "the cause"
Sorry ba, that wasn't a garentee, but if I could get a couple of bloke keen for a drive, and which date ate we taking about?
If I do make it ill throw the welder in for sure.
Easter is a no go but after that should be fine.
Kallen Westbrook
Owner of
Westy's Accessories
Attachment 27267
Just read that it is a factory bar and should be fitted with a warm winch( think that's funny)
So I guess it can take a winch... Just did not seem strong enough???
Throw is a pic with a bit more of the bar, and the mounts are the critical part.
Kallen Westbrook
Owner of
Westy's Accessories
What happens if its a cold winch?? Lol
I have portable 15a stick welder and associated gear needed
It's what I do. der
How can we tell if its factory, ARB etc without brands on them. It looks similar to mine but I was told mine is ARBQuote:
Originally Posted by Bloodyaussie
Does this helpAttachment 27269
Looks like the standard Nissan bar. My mate has a winch on his and has used it many times without a drama.
Where would the mounting points be?Quote:
Originally Posted by Bloodyaussie
yes thats the nissan winch bar made by arb, mounts to the plate in the pic with the two holes in it the other two holes are not in the pic but mine has four holes, maybe down the bottom covered by the metal in front
Ok I know of issue with this bar and will arrange to have it looked at but for now.... I finally stuck my big fat bottom inside the car and I must say the transfer box is stuffed (I though these were unbreakable)
As I have had a few beers did not want to go for a drive but seem to select all gear no problem but the clutch is rooted, no doubt about it... now I am hoping as with mine that the problems with the gear box are just clutch related??
Now can anyone tell me for sure whether the transfer box is the same as GQ????? as there is one available ..
Next issue is the rear LSD... 4.3.......
I really hope the gearbox is ok as this is a major problem... I will know more later as George will pop round tonight and go for a drive..
All for one and one for all, count me in too, nothing worse that good people going through tough times,
TAPPN OUT
Transfer case is the same threw out the range. Well that's Tony's word in the preventative maintenance thread..
Geeze, this member has struck a lemon..
I say we get together and give the seller a floggin..
Kallen Westbrook
Owner of
Westy's Accessories
I said I would love to go round with one of my many guns and stick it up his nose but that does nothing to fix this... he will get his through karma!!Quote:
Originally Posted by Westy's Accessories
That is good news if the cases are the same..!!!!
Wheres your donation ya big lug!!! dont make me spend money on a plane fair for $20 of donation!!!! he he... dont hurt me Kallen!!!!
What about a good old fashioned "STONING"
haven't been to one for ages Lol
Karma is my middle name lol nah i got a shoe box full of crackers that can make his letter box real pretty!!!! Haha
I'll be there as soon as i escape Alcatraz ..... GTG the warden is coming lol
Still need more love guys...... there are many I am thinking of who have gone all quiet !!!!!
Will send some $ through to you Tom ba as have to wait until I get paid. Let me know if you need a hand with anything at all man
Just caught up with this. Happy to shoot a donation through. Will hook up with PayPal later tonight when I get home.
Tip tip tip......tap tap tap....
Pm sent ba
BA do you have a rough idea whats required to completly finish his ride,
Not so much $$$$$$ wise but parts etc, I'll then pass that info on.
Do you think the guy selling it knew what the problems were. Or was this just a lack of maintenance that got worse!Quote:
Originally Posted by Bloodyaussie
Transfers the same mate.
Ok from what I can see the Gear box seams ok but will know more later...
What we do need is: 1: Rear LSD
2:Clutch (obviously )
3: Transfer case (is on its way)
I have not checked uni's yet or anything else as I have been trying to do 50 million things at once but as soon as I get some proper time I will go over everything!!!!
Still need lots of other things taken care of ..... will get into that later?????
Need to eat!!!!!!
Hurry up will ya !!!!
I'd also be interested in helping out with the work. I'm no mechanic but I'm not a total spaz on the spanners and I'm keen to know some more about how to do some of these things.
I could also stand around and drink beer as well as anyone too!
Any wiring required?
Tip tip tip......tap tap tap....
Just sent PayPal.
Tip tip tip......tap tap tap....