The GU custom barwork inspiration thread

I didnt think any front tube bars were compliant? Thats interesting!

top thread Tony
some good looking additions there

Quote:

---

Originally Posted by GUIV

rear bar airbag compliant?? your airbag will NOT depoly if someone hit you from the back, even with the factory plastic bumper... So there should not be any issue with that.

Front bar is different, most of the tube one is not compliant. The only one that is complaint is XROX one as far as I know.

---

looks like i might have been led up the garden path on that one hmmmm will have to do some more digging and see what else i can find out about it i must admit when iwas told that the rear bar had to be air bag compiant i did ask the same question,,, the answer i was given is that if your hit hard enough for the rear you could still be thrown forward and injurring yourself. question questions:1087:

Quote:

---

Originally Posted by YNOT

Another front tube bar.

Tony

---

I likey alot.

Quote:

---

Originally Posted by YNOT

Nice use of round LED lights.

Tony

---

i know its a big ask but im chasing some dimensions to knock up a rear bar simlar to this be greatfull if any one can help out.
cheers warey

Quote:

---

Originally Posted by YNOT

The idea of this thread is to post up photo's of custom bar work on GU Patrols so when members go looking for ideas it's all in the one thread. If you are making your own barwork please start a seperate build up thread, then post up photo's of the barwork here when you are finished.

Tony

PS. Note the use of Cat mudflaps Kat.

---

I love this bar! Looks fantastic.

I've been looking around for a rear bar/wheel carrier.

Looking closely at Millweld bars. Unfortunately they moved to Mansfield.. they were in Bayswater near where I work. :(

MILLWELD BARS

I haven't made a decision on which style, but I'm leaning toward the squarer, more solid looking designs rather than just tube.

Also wouldn't mind getting steel side steps with checkerplate infills at the same time.

The Millweld bars look interesting. Anyone running them? How practical are their swing aways'. Great thread

Dave

Love this thread, has given me some great ideas. This bar in particular as it doesn't look that difficult to manufacture, also it looks a lot lighter than the other bars. Thanks again.
Cheers Rick PS love the Cat flaps.

Quote:

---

Originally Posted by YNOT

The idea of this thread is to post up photo's of custom bar work on GU Patrols so when members go looking for ideas it's all in the one thread. If you are making your own barwork please start a seperate build up thread, then post up photo's of the barwork here when you are finished.

Tony

PS. Note the use of Cat mudflaps Kat.

---

Sorry bud I forgot to ask in my previous reply, do you have any photos of the wheel carriers as well, also, can you tell me the weight of the bar & diameter & the wall thickness of the pipe you used
Cheers, Rick.

Quote:

---

Originally Posted by YNOT

The idea of this thread is to post up photo's of custom bar work on GU Patrols so when members go looking for ideas it's all in the one thread. If you are making your own barwork please start a seperate build up thread, then post up photo's of the barwork here when you are finished.

Tony

PS. Note the use of Cat mudflaps Kat.

---