Sir Roofys

Done well this morning got most of loom out of the way
nearly have access to fuel pump
let the first blood out now bandage on
arms are starting to look like a spotted dog
ah well soldier on

Quote:

---

Originally Posted by Sir Roofy

Well what a nightmare this is going to be
every thing went well till I got to the injector
got it undone ok the nut slipped back
the seal all most fell out
now the trouble starts the injector pipe won't
go back far enough to let the seal come away from
the pipe
thinking ill have to strip right hand side to get to the
manifold and fuel pump

---

You might get away with only removing that pipe from the pump. So if you undo the clamp holding all the pipes together, then the nut holding the pipe to the injector, you may be able to manipulate the pipe out of the way. I fell for ya Roofy. Done this once, and never again will I do it. Big pain in the backside of a job.

Quote:

---

Originally Posted by mudski

You might get away with only removing that pipe from the pump. So if you undo the clamp holding all the pipes together, then the nut holding the pipe to the injector, you may be able to manipulate the pipe out of the way. I fell for ya Roofy. Done this once, and never again will I do it. Big pain in the backside of a job.

---

Thanks Mark your right won't happen again 3.0 l are a pain at any time

Quote:

---

Originally Posted by mudski

You might get away with only removing that pipe from the pump. So if you undo the clamp holding all the pipes together, then the nut holding the pipe to the injector pump, you may be able to manipulate the pipe out of the way. I fell for ya Roofy. Done this once, and never again will I do it. Big pain in the backside of a job.

---

I just edited my post to what i was meaning...

Has the rain hit yet, pissing down here ATM, looks as tho its started to cross the mountains. . .

Quote:

---

Originally Posted by mudski

I just edited my post to what i was meaning...

---

Figured that's what you meant

Quote:

---

Originally Posted by Rossco

Has the rain hit yet, pissing down here ATM, looks as tho its started to cross the mountains. . .

---

It has mate and the wind as well
thunder as well

Good progress this arvo once the rain stopped
took some more gear of the motor for easy
access to the pump
got 2 seals done and thinking about leaving
the other 2
thoughts on this
will put up some pics later

Quote:

---

Originally Posted by mudski

When ya done mate. You wanna come over to my place and pull my radiator out for me? Lol.

---

And bring the workshop with you. :)

Quote:

---

Originally Posted by Cuppa

And bring the workshop with you. :)

---

Can do when do you want it