Can some one tell me what the 10mm pipe does that is behind the turbo
and appears to go around the back of the motor
Im going to by-pass this some how
Printable View
Can some one tell me what the 10mm pipe does that is behind the turbo
and appears to go around the back of the motor
Im going to by-pass this some how
Oil return pipe ?Quote:
Originally Posted by threedogs
nah its got coolant in it, I think its to do with the heater some how.
If it is the one i think it is then I wouldn't be bypassing it... I would be replacing it and it may be a prick of a jobQuote:
Originally Posted by threedogs
Does it run from the Oil Cooler via the Turbo to the back of the Block?
IIRC heater hoses are larger dia and come from the front of the ZD30?
The more I look, the more convinced I am that you are describing the coolant return line from the Turbo...
Knock, knock... you home TD?
The pipe has a bracket on it so Im thinking I can cut it back [50mm]
to some good material and just re fit a longer piece of hose.
Not sure where the bracket bolted up to maybe the dump pipe heat sheild.
Will try and remedy it today.
You home who ? lolQuote:
Originally Posted by the evil twin
Went to SCA and brought some high pressure 5/16th hose and some hose clamps to suit.
looking again today it looks like it is just a tube that runs behind the motor and connects to the other side
with a small piece of hose same as the other side.
Im hoping if someone can tell me or show me a diagram of where this tube goes.
If its just a tube great if it branches off behind the motor ,thats a different story
Found this picture, it appears I can just use some hose till I can buy the pipe
I had a look at mine the small pipe comes out of the heater pipe goes around block into the EGR
I wouldn't go cutting or blocking that line very hard to get at any way
Thanks mate have a look at that blow up its that small tube with two 90 degree bends
looks like I can by pass it till i can buy one, just to get me mobile again