I'll have a look closely now when rip it all up.
Just got some goodies. Battery , terminals, some lugs, cables etc... http://www.nissanpatrol.com.au/forum.../2017/05/4.jpg
Sent from my SM-G920I using Tapatalk
I'll have a look closely now when rip it all up.
Just got some goodies. Battery , terminals, some lugs, cables etc... http://www.nissanpatrol.com.au/forum.../2017/05/4.jpg
Sent from my SM-G920I using Tapatalk
New battery, new terminals, new earth cables. Lucky I attacked this job as a few things were corroded big time. The tray under the battery had surface rust which I cleaned up and flooded with Lanolin. Even found some tools under there. Both - and + terminals were in not a very good condition so, I'm glad I replaced those.
If things were this bad up the battery end, I hate to think what they're like at the starter motor and alternator end... Those are next on my list.
Things you find under your battery ...
http://www.nissanpatrol.com.au/forum...id=71757&stc=1
Earth strap that went from battery to body to motor was corroded to the shit. The copper was all green and brittle.
http://www.nissanpatrol.com.au/forum...id=71758&stc=1
New earth strap lugged and heatshrunk.
http://www.nissanpatrol.com.au/forum...id=71759&stc=1
End result.
These terminals work really well. But, are not very good if you have a few accessories added to it as it ends up a un-tidy looking job. Even though I'm glad I fixed a lot of the corroded cabling etc, the end cabling/terminal job ended up messier than I began with.
I'm thinking of adding a distributor box next to the battery for some of the accessories.
http://www.nissanpatrol.com.au/forum...id=71760&stc=1
I have been working on mine to add a few more accessories.Attachment 71763
Reckon mine fit the 'ugly but do the job' category.
Attachment 71761Attachment 71764
@PeeBee you got this mate! Bring it!! These guys ain't seen nuffin!
So I'm not alone with my style of wiring !Quote:
Originally Posted by PeeBee
Love it mate, well done;-)Quote:
Originally Posted by PeeBee
Scored myself 12 metres of 70mm2 battery cable for nothing today so now im gunna finally pull out the cole hersee manual battery isolater and put a vsr in with decent cables and tidy up my poxy wiring in the engine bay. Might make some jumper cables aswell with the left over 70mm2.
Sent from my SM-G930F using Tapatalk
Rewire the winch for a start. If you don't have one then buy a proper crimping tool and also proper cable shears.Quote:
Originally Posted by firm351
Now I've seen some mighty and interesting busbars in my industry, but this one takes the cake ol' Phil. lol
http://www.nissanpatrol.com.au/forum...id=71766&stc=1