Bacho's GU6

Run out of time to complete the transfer and transmission case, hence the spare 2 spots.

Question for those that have done this upgrade - what did you do with the factory hoses?

I pulled the rear one out completely, but it's now left a hole where it used to screw into the 'cross member'(?) - below photo has the barb just sitting in there for photo purposes

Attachment 53235

The front one if I pulled out of the diff housing, but left the rest of the cable there and just tied it up out of ether way...

I removed all the steel piping for the front diff (engine was out) and just used the press in tubing. I left the rear barb in place on the cross member as I couldn't be arsed pulling it out when it isn't doing anything or in the way.

Quote:

---

Originally Posted by sooty_10

I removed all the steel piping for the front diff (engine was out) and just used the press in tubing. I left the rear barb in place on the cross member as I couldn't be arsed pulling it out when it isn't doing anything or in the way.

---

Yeh I took the rear off because it was relatively easy, and figured the hose could be useful as a spare in an emergency but the front one looked like a PITA to remove (with the engine still in). Thanks mate.

Much the same as Sooty I removed as much as I could and used
6mm push fittings if anyone is after some Diff breather kits I have heaps here.
I haven't got around to doing the auto and transfer case yet, with my back the way it is
don't think it will ever get done :[

A few photos from Easter trip into the High Country out the back of Licola

Attachment 56936Attachment 56935Attachment 56937Attachment 56938Attachment 56939Attachment 56940Attachment 56941Attachment 56942

Quote:

---

Originally Posted by Bacho86

A few photos from Easter trip into the High Country out the back of Licola

Attachment 56936Attachment 56935Attachment 56937Attachment 56938Attachment 56939Attachment 56940Attachment 56941Attachment 56942

---

Looks great mate. You got some good photos of your rig, looks excellent.

Thanks mate, took the opportunity to take a heap of photos whilst in a great part of our backyard!

Attachment 56949Attachment 56950Attachment 56951Attachment 56952Attachment 56953Attachment 56954

Attachment 56955Attachment 56956Attachment 56957Attachment 56958Attachment 56959Attachment 56960

Since last update I've installed a duel battery system, a few switches and new CD / Radio head unit with Bluetooth

ARB Battery Tray holding a Centry Marine 730 battery controlled by RedArc SB112 Smart Battery Isolator

Attachment 63786

http://www.nissanpatrol.com.au/forum...2016/01/66.jpg

Ran cable from the Auxillary battery down to a rear fuse box hidden behind the small access panel to power the fridge, LED lights, rear work light, USB power, 12V sockets and a gauge / amp meter

Attachment 63788

http://www.nissanpatrol.com.au/forum...2016/01/67.jpg

http://www.nissanpatrol.com.au/forum...2016/01/68.jpg

http://www.nissanpatrol.com.au/forum...2016/01/69.jpg


Sent from my iPad using Tapatalk