Tighten your nuts!!!!!

Was this in your wagon?

Quote:

---

Originally Posted by Winnie

Was this in your wagon?

---

Yes, got body rubbers to do next

How many jumps did it take to do this damage?

Quote:

---

Originally Posted by Winnie

How many jumps did it take to do this damage?

---

About 630000 km's worth!

Quote:

---

Originally Posted by liftlid

Final update all back together and taken for a test run and what a difference it makes, most of the little clunks I thought were other things have gone as well, and back end seems tighter?
If you hear a rattle that sounds like a loose chain, check the rear bolts.
Thanks for the advice

---

Good to see you got it sorted

If you are going to just weld washers over the elongated hole that big, you are always going to have problems. The sleeve in the middle of the bush must have enough clamping pressure on it. The holes look way to big.
I would go to the trouble of cutting it off and welding on another one.

Quote:

---

Originally Posted by arra

If you are going to just weld washers over the elongated hole that big, you are always going to have problems. The sleeve in the middle of the bush must have enough clamping pressure on it. The holes look way to big.
I would go to the trouble of cutting it off and welding on another one.

---

Didn't just weld washers in, felt the same as you that it might not work so sleeves welded in, if I had a junk chassis I would have cut off bracket. Thanks