Here's a couple more pics of the tray painted, should be finished soon.
The battery box is for a 200ah Lithium LIFEPO4 setup, will go into that later.
Attachment 37596Attachment 37597Attachment 37598
Printable View
Here's a couple more pics of the tray painted, should be finished soon.
The battery box is for a 200ah Lithium LIFEPO4 setup, will go into that later.
Attachment 37596Attachment 37597Attachment 37598
Are you gooping and then riveting on the alloy checker plate.
Looking good BTW, you may want to look into strengthening
the rear shock towers as they have a tendency to crack.
You could also mount some more batteries under the tray to keep weight down low.
Too much waisted space under a tray IMO, large pull out drawer at the rear??
Hi TD, i used stainless rivets and sikaflex which appears to have done the trick.
Attachment 37655
Now it's looking flash, going to have to wear the sunny's at night.
Just waiting on the box now.
That's come up a treat gotta be happy with that.
Bling it on LOL
Very tidy. Well done.
Out of interest is the tray frame sprayed with 2 pack or enamel ?
Hi TD, i just used an enamel because it was easier to use.
Very nice Emu!
Did you use anything to isolate the aluminium checkerplate from the steel frame? Or does the sika and enamel take care of that?
three dogs, how do the batteries fair under the tray when you put them under water?
I used to have mine under there but moved them into the canopy when I built my canopy.
2500 is a nice length I reckon.
Mine is 2580 and on a coilcab. I am very very seriously considering shortening it up to about 2100, its very ass heavy
http://i29.photobucket.com/albums/c2...psaf8aafb0.jpg
Have moved the tent right forward and changed springs and shocks since this (to a very stiff spring) will see what happens when the motor goes back in, if I still dont feel safe in it I will be shortening it up.
Hi Sparrow, by the time eletrolosis does the job she'll be in the graveyard and i'll probably be in there with her.