yed 3d checked for voltage at the other side of the relays and all good, just the starter by the look, getting replaced tomorrow.
Printable View
yed 3d checked for voltage at the other side of the relays and all good, just the starter by the look, getting replaced tomorrow.
Cool not too bad then, they coat the battery terminals with some thin wax type coating, Brother in law auto lec makes heaps just cleaning them.
well the latest news, the brushes were stuck from corrosion inside the starter, this troll belonged to dept of fisheries originally so i expect that was the cause of the rust, the body inside and the windings were salt water damaged as well so new starter and i will look at cleaning up the old starter and replacing the brushes myself to use as a spare, the auto sparky is also changing the aircon compressor bearing while he is at it, one of the few that will do it or should i say can be bothered to do it.
Oh nice hand pass Stropp, nothing to do with any of the bog holes or sloppy tracks you have over there, I say dropping the ball free kick against you.lol
Now I'd be buying a few cans of LANOTEC and spraying the all get out of those hard to get spots and terminals, good product highly recommend
Well it's all done and its much better now, the bearing replacement on the ac compressor was way cheaper than replacing the compressor.
Good to hear Stropp, glad you got it sorted
Are you with HBF?
Sorry, I'm in one of those moods. lol
No mate medibank private, lolQuote:
Originally Posted by DX grunt
Jeez and you're on about me hijacking threads!!!!!!! HahahaQuote:
Originally Posted by DX grunt
Hows the new battery go there stropp?