Not today but I got these on Saturday at the Perth Comicon to add to my collection.
Attachment 57119
Attachment 57120
Attachment 57121
Printable View
Not today but I got these on Saturday at the Perth Comicon to add to my collection.
Attachment 57119
Attachment 57120
Attachment 57121
never "bought" it but did a swap for an evap plenum and got myself a nice little 40cc stihl chainsaw with a 16" bar and new chain and carry case for the patrol and camping :) win win .
New airbox lid seal for the beast to replace the old hard crappy non sealing one that's in there 8-)
http://i1083.photobucket.com/albums/...ps0kuskvgb.jpg
Need to try catch up with you so I can give you some coin for the light bracket, haven't forgotten, just haven't been down your way recentlyQuote:
Originally Posted by Stropp
No rush mate, when you get here is fine 😀Quote:
Originally Posted by oncedisturbed
dual battery tray for the y62
Does it mount on the rear?? Those 62's are very full under the bonnetQuote:
Originally Posted by kevin07
Just put down a deposit on a td42 engine. 90 model with factory turbo and inter cooler setup off of an 05. My ute will be getting powered along quite nicely with that!!
Bought one of these today, pick it up around November I hope, just in time for Christmas. Mods on the Patrol will slow down now....
http://i1083.photobucket.com/albums/...psamxbblm6.jpg
Owwwwww. Niicccceeeeeeee.Quote:
Originally Posted by Rocket55
Bought a couple of OAR-GEE lures.
I got the 100mm Plow's which I got the 15ft version, perfect for the 5-6 metre mark of Lake Mulwala.
Also got a couple of ATOMIC lures SHINER 85 for the shallower waters 2-3 metre mark.
3 cans of degreaser and then made a mess
http://www.nissanpatrol.com.au/forum.../2015/04/1.gif
ipf 900 25 watt tri beams
BOSS Chassis Brace kit and EFS 2" lift springs all round.
Car drives and handles much better that the clapped out ARB springs + sits 50mm higher. :Yahoo!:
Attachment 57493 well ordered them yesterday get em 2morrow
Sold a heap of junk I never use on a swap & Sell site to finance:
1 x catch can from Mudski
7" HID Spotties
20" LED light bar
Now looking for more junk I never use to finance injectors, front locking hums kit & 3" exhaust.
Sounds like a great idea , selling off some gear to finance new projects,Quote:
Originally Posted by SonOf
eg I have 2 Piranha lights 12v I'm never going to use again ever, some brand new dome tents 4m.
Need something to tinker with during our routine unfancy friday night BBQ's so I bought a length of vacuum tube and a few small filters to extend the breathers.
Still waiting on more intake items to arrive so ordered some 60mm alloy pipe 90 degrees
to up the boost volume, from 55mm to 60mm to the intercooler.
Any chance you could take down a few dimensions. Just rang ARB but they couldn't confirm that it would fit other brands because it's made for the ARB swag . I was quoted $120, does that sound right?Quote:
Originally Posted by MEGOMONSTER
Thanks for the reminder Mego. I have that same bag, just never used it. And have just been strapping the swag down with normal ratchet straps... I didn't even know the bag had that feature! Will go have a look now.Quote:
Originally Posted by MEGOMONSTER
Got this bad boy for the garage. No more freezing nights working in the shed. . . Toastieeee :)
Attachment 57499
Awesome stuff Ross, beers in your shed on the weekend then =] hahaha
Ooh yeah, just hope it doesn't burn through the wood too quickly. . . ;)Quote:
Originally Posted by Winnie
I know how to fix that now! Bwahaha. Door is still at the shop and we are cold... LolQuote:
Originally Posted by Rossco
I can almost hear the pitter patter little foot stepsQuote:
Originally Posted by Winnie
That looks similar to my manland one, mine has a dampner lever top left,Quote:
Originally Posted by Rossco
could use a new fire box in a year but works well we even hooked up a fan
To make it a tad more efficient. great heater though
Is an old Arrow one, it's a bit ruff & ready, firebox & baffle are a bit how's it going but rustic charm! Perfect for the man cave. The bloke said it went fine, I'll hook it up tomorrow and see how it goes, came complete with flue and bits too. :)Quote:
Originally Posted by threedogs
Worked a treat in my mates garage, works a treat here to ,
He only removed to to fit a split system in the garage.
His loss my gain I say, Mine has perforated steel on the top the place a cast iron kettle
to create a bit of humidity.
Fire box very easy to replace in 320 stainless
I'll garb a pic later
not a bad heater there rossco, arrow are locally made by shamic sheet metal in melbourne and parts can be bought from scandia who make all the replacement parts for those heaters.Quote:
Originally Posted by Rossco
$35. Can't go wrong I think.
And with a long lid lifter.
Attachment 57547
Last night I got my new engine! Silvertop td, with turbo and intercooler off an 05. Conversion time!
Got myself a ridge Ryder tyre repair kit from super cheap, OVER 50% off!
Attachment 57626
Good price that isQuote:
Originally Posted by Bacho86
Finally got myself an intercooler, cheap Chinese eBay cooler, now just have to source some hoses and pipe to fit it all up.
Good fun mate... going front or top mountQuote:
Originally Posted by sooty_10
Those zip up carry bags are ideal for the ovens , just put some cardboard between the lid,Quote:
Originally Posted by biggqwesty
Keeps everything nice and clean, IMO
Ease of fitment I think I'll go top mount for now. See how it goes.Quote:
Originally Posted by Bloodyaussie
Tyre changes are going to be much easier now.
Attachment 57696
I'm thinking its about time I buy a jack. I know dad is one day going to want his back. Oh well I guess I'll worry about it when the time comesQuote:
Originally Posted by jay see